Quote:
Originally Posted by dwx
Don't fully tighten down the rears until you have the front bolts correctly re-threaded after putting the inserts in. Even then though it didn't help me out since I still couldn't get one bolt to thread correctly 100%.
It's also not a bad idea to get an alignment after doing this, the subframe movement can definitely throw off your alignment settings.
|
Am not sure we need an alignment because the subframe it is exactly at the same place like before you Whitelined it.
The hole into the chassis can't move
. I know maybe the subframe is more tight compare to stock.
I will ask Whiteline tech to be sure and I will let you know!