Quote:
Originally Posted by Kwaziekeller
I didn't have a vibration, but my shift know was loose (it turned in my hand mid shift one day)... so I tightened it up. a 1/2 turn was about right, but I made the other 1/2 turn so the pattern was right. It's definitely tight! You may be able to get that other 1/2 turn on yours as well.
|
I was thinking about going another 1/2 turn, but I don't want to break anything.
Below is a diagram which shows the different parts...dont have a pic. There is an inner ring between the outter knob and the threading which doesn't touch either of those pieces, I -think- this is what vibrates so I'm not sure if putting putty or tape on the threading of the shifter will dampen the vibration.