A few goodies arrived today!
First of which are the newly released RaceComp Engineering hollow front and rear sway bars! Both front and rear have 2 adjustment positions. They feature integrated anti-walking tabs to eliminate unwanted lateral movement of the bars during cornering, as well as a a nice subtle gray powdercoat finish.
Quote:
FRONT
OE bar: 18 mm solid
OE measured bar rate: 24.7 N/mm
Racecomp Engineering bar 25mm tubular, adjustable
2 position adjustable
P1 = 60 N/mm (335 lbs/in)
P2 = 80 N/mm (455 lbs/in)
REAR
OE bar: 14 mm solid
OE measured bar rate: 19.8 N/mm
Racecomp Engineering bar: 19 mm tubular, adjustable
2 position adjustable
P1 = 33 N/mm (188 lbs/in)
P2 = 45 N/mm (257 lbs/in)
|
Looking forward to installing these as they will be a great match for the RCE Yellow springs. I'll likely be setting the front to the softer setting and the rear at the stiffer setting because I like my car to rotate a little bit at the limit.
Thanks again to Myles and Andrew @
Racecomp Engineering