Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - -3 degrees camber in the front on stock suspension

RToyo86 · 11-16-2023, 10:16 AM

Should be good for 3° front as mentioned. I have basically same setup as Ohio enthusiast. Bilstein B6 dampers which have same sized holes as OEM struts.

• Pedders top mounts
• SPC lower camber bolt
• Crash bolt upper(take OEM lower bolt and swap it up top)

If you are doing it DIY you can max it out your self before taking it for alignment. Alignment shop only adjusted toe slightly but otherwise I had -3.1° with how I set it up on stands.

11-16-2023, 10:16 AM	#7
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,213 Thanks: 1,740 Thanked 2,275 Times in 1,158 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Should be good for 3° front as mentioned. I have basically same setup as Ohio enthusiast. Bilstein B6 dampers which have same sized holes as OEM struts. • Pedders top mounts • SPC lower camber bolt • Crash bolt upper(take OEM lower bolt and swap it up top) If you are doing it DIY you can max it out your self before taking it for alignment. Alignment shop only adjusted toe slightly but otherwise I had -3.1° with how I set it up on stands.