Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - -3 degrees camber in the front on stock suspension

Ohio Enthusiast · 11-15-2023, 09:26 PM

I don't think you can get -3 without lowering. I have Pedders and both top and bottom camber bolts together with RCE Yellows and I could get around -3.2 but I dialed it back to -3. Without the Yellows I think it would be about -2.6 or so.
With both top and bottom camber bolts I was really close to the spring perches with stock size tires, maybe 3-4 mm. I didn't actually get any rubbing, but I since added 15 mm spacers to also easily clear wider tires (225/45R17).

11-15-2023, 09:26 PM	#2
Ohio Enthusiast Senior Member Join Date: Apr 2020 Drives: 2018 BRZ Location: Dayton, OH Posts: 930 Thanks: 1,389 Thanked 784 Times in 446 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I don't think you can get -3 without lowering. I have Pedders and both top and bottom camber bolts together with RCE Yellows and I could get around -3.2 but I dialed it back to -3. Without the Yellows I think it would be about -2.6 or so. With both top and bottom camber bolts I was really close to the spring perches with stock size tires, maybe 3-4 mm. I didn't actually get any rubbing, but I since added 15 mm spacers to also easily clear wider tires (225/45R17).