Quote:
Originally Posted by NoHaveMSG
Not a great pic, but here is the inside of the sleeve.
The quill on my spare trans is in good shape and measured a tick over 1.292"
Exedy bearing ID is 1.309", hard to measure though since it is plastic. The width of the inner bearing "race" measured .752".
The inner sleeve on the BG has an ID of 1.306". The length of the sleeve that rides on the quill measured 1.387". I have a little mixed feeling about the grease groove but I don't think it will be an issue.
|
i've got mixed feelings as well. once one starts using the clutch, that dust is going somewhere, most likely right into that dab of wet grease...