Here is what I think I will try for the first part of the track season. Hoping to get the offsets correct and get an aggressive rear roll/pull. Please chime in if you think I will have any problems. Going for a square setup.
Fronts - Todoroki +30mm bolt on front fenders.
Wheel: 18x10 +40
Tire: Pirelli DH 265/645/18
Rear - Rolled, Pulled
Wheel: 18x10 +40
Tire: Pirelli DH 265/645/18
The section width of the Pirelli seems to be 10.7" - Which is around 272mm
I am also curious if I could step up to the DH 275/645/18 which has a section width of 11" - 279.4mm, but may not know until I experiment with a set and dial in the fenders.
|