Quote:
Originally Posted by iag48st
Quick question: I adjusted my clutch years ago and this past weekend I changed my clutch and keep almost stalling lol. It’s catching higher than before the new clutch.
Does the clutch replacement reset the adjustment (I doubt)?
|
To some extent, yes it’s possible.
As a clutch wears, the fingers will gradually rest further out resulting in a clutch that grabs lower in the pedal stroke.
Back in the day of cable or linkage clutches, it was necessary to periodically adjust slack to keep things functioning. Hydraulics did away with the adjustment, but the grab point can still change over time. Variations in the pressure plates and disc thickness can have an impact too.
So, not unlikely things have changed from old clutch to new clutch. Especially if you changed brand or type, etc.