Quote:
Originally Posted by Aus
going crazy reading hundreds of posts, so thought would ask here.
Looking at Rota Titan R's in Matt Bronze. In Australia, these only come in 17x9 +38
Car will be on stock suspension, might later on go with TRD lowering springs at most. No plans for coil overs/camber etc
First question is, will these sit flush, and then whats the best size tires to make sure no clearance issues and no negative impact on drivability. Both on stock suspension and if i go with lowering springs down the line?
Or Rota also do the Titan F here in a 17x8 +42. Is that a better size?
Only difference between Titan F and R from what i can gather is more aggressive spoke angle on the R and different sizes
|
17x9 +38 will fit just fine on stock suspension and lowering springs. Yes it will be just about flush if you lower the car 1" with the TRD springs. If you dont get that lowering springs then that will poke a bit. The tires you can use are 245/40/17. If you dont plan on lowering the car then 17x8 +42 might be a better choice.