Quote:
Originally Posted by Esom777
Thanks. Looks like voltage is 0 but I’m getting the proper frequency reading from the sensor itself so my best guess is the ethanol content analyzer went bad? I was able to buy a new oft harness from someone on here who had one they aren’t using anymore thankfully. Hopefully not a common issue with these kits and the new harness ends up working.
|
If anything, you can probably make your own converter using arduino. There are tutorials/codes online to help convert the HZ from the ff sensor to voltages (iirc OFT FF tune is 0.5-4.5v). Other option is that you can get the off the shelves ECA (zeitronix is one example) and have Steve99 create you a new tune to run 0-5v instead.