Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Phantom FTS Electric Supercharger Owners Thread

keen as · 06-02-2019, 07:20 AM

I'm after a new electric motor with or without the compressor.

I've had the system for a few years. Last year, the motor spun in the housing and twisted the cables. Same as this post from someone else. I followed the recommendation and applied sealant to fix this problem.
http://www.ft86club.com/forums/showp...postcount=1095

The cable insulation must have been damaged. Many months later, the compressor would work intermittently. I checked the connections and found one cable loose at the motor. I opened the motor and found one cable almost burnt out with some burn marks on the inside of the motor case.

https://photos.app.goo.gl/X4sKFT6iPRgzAfd76
https://photos.app.goo.gl/wiP2GhY6sSv5p1pe7

I disassembled the compressor. Same as this post from someone else.
http://www.ft86club.com/forums/showp...postcount=1100

I measured the unit in case it helps someone point me to a replacement.

It runs on 28V, I think it is 4000W

Motor diameter 55mm, Length 67mm, Shaft diameter 8mm. Shaft length 39mm. (The shaft is modified and tapped)

https://photos.app.goo.gl/Dj7XhH2mf2HdDFMWA

06-02-2019, 07:20 AM	#1177
keen as Senior Member Join Date: Oct 2012 Drives: 86 GT MT Location: Sydney Posts: 176 Thanks: 256 Thanked 80 Times in 45 Posts Mentioned: 11 Post(s)	I'm after a new electric motor with or without the compressor. I've had the system for a few years. Last year, the motor spun in the housing and twisted the cables. Same as this post from someone else. I followed the recommendation and applied sealant to fix this problem. http://www.ft86club.com/forums/showp...postcount=1095 The cable insulation must have been damaged. Many months later, the compressor would work intermittently. I checked the connections and found one cable loose at the motor. I opened the motor and found one cable almost burnt out with some burn marks on the inside of the motor case. https://photos.app.goo.gl/X4sKFT6iPRgzAfd76 https://photos.app.goo.gl/wiP2GhY6sSv5p1pe7 I disassembled the compressor. Same as this post from someone else. http://www.ft86club.com/forums/showp...postcount=1100 I measured the unit in case it helps someone point me to a replacement. It runs on 28V, I think it is 4000W Motor diameter 55mm, Length 67mm, Shaft diameter 8mm. Shaft length 39mm. (The shaft is modified and tapped) https://photos.app.goo.gl/Dj7XhH2mf2HdDFMWA Last edited by keen as; 06-02-2019 at 07:32 AM.