Quote:
Originally Posted by Leonardo
Yes. Clean the shit out of the parts. Tape them off. Spray a couple coats of high temp paint. Primer and clear are unnecessary.
Do not touch them till they are dry. 24 hours should work if your parts stay at least 60 degrees F.
|
disagree Ive done the just paint color on method and it will chip off. The primer is to grip to the iron/metal.
And there is high heat clear coat, not too look glossy but to protect the color coat. The amount of nasty particles, road salt, brake dust can eat through the paint.
What I said is important if you want it to last. If you want to skip steps and do it quick you will be doing it again next year.
Saying from old guy at work : "If you don't have the time to do it right when will you have the time to redo it"
https://www.amazon.com/Rust-Oleum-Au...62129512&psc=1