So I have 2 incomplete engines for sale, here is the full story.
My original engine blew after about 3k miles of being boosted. Mechanic and I came to the conclusion it was most likely a tune issue. The ring land on one of the cylinders came apart and scored the cylinder beyond repair (unless you resleeve).
So I order another engine (we'll call this engine #2), it comes in and some of the covers/pulleys and other misc. pieces are damaged. I call the company and tell them it is not acceptable, and they send another (engine #3).
I ordered a manual and they sent me an auto engine (twice) so I told them I'm keeping the original engine they sent me (#2) to recoup the mechanic costs of having to swap parts over that he wouldn't have otherwise had to do if they sent a manual engine.
What I have for sale is my original engine and engine #2. The bottom end on engine #2 was compression tested and it was good. You would just have to take some of the other parts from the original engine and put on engine #2.
I was going to build engine #2 with new pistons/rings and a few other things, but I am moving soon and don't have time. This would be a great way to start a project engine for cheap if you have the knowledge.
This is engine #2, it was wrapped in cellophane and ready to be shipped back to the engine supplier. It has been in my garage the whole time.
This is the torn down original engine
Any questions feel free to contact me @ 559-nine1six-two41five
Located in the Victorville/high desert area.