Quote:
Originally Posted by brzgabriel47
How did you wire yours if you don't mind me asking. Did you use the supplied jdm wiring harness?
|
I basically cut the JDM harness in half. The harness goes from 4 wires into 2 wire, after the transition I cut the harness. From there I took the ground wire from the now cut harness added a terminal and grounded it to a bolt in the engine bay. Then I took the power wire from the harness into the cabin and used a fuse tap to tap it into the DRL fuse which is under the steering wheel. It's a 90% solution. The DRLs don't function exactly like the normal boomerangs. The JDM DRLs only run when the engine is running. and don't turn off with the hand brake.
If you want exactly the same behavior as the boomerang DRLs. You would ground wire in similar way as above. Then tap the power into the headlight wire that powers the DRLs. I didn't want to do this because the headlight wiring is not exposed. So you would have to cut open wiring loom.
If you need more detail let me know.
More photos:
