Suspension issue (Camber)
Hi guys im hoping some of you might have knowledge on this or have had this issue and resolved it. So i installed godspeed mono max coilovers on my brz, these come with camber plates. I have no other suspension components on my car. But im having a issue with my passenger side wheel not cambering as much as my driver side. With the camber maxed out on both plates they do not match. I tried looking around the coilover to see if there are any differences and he only thing i could find is that the sway bar end link Dont match. by that i mean that the passenger side is upside down compared to the driver side. But with the endlinks being the same length i do not see how this could be a issue. Please any info would be greatly appreciated.
Last edited by Devin11498; 07-03-2018 at 12:46 PM.
|