Hey guys, tore apart the valve cover and marked all the sprockets/chains/etc and as I loosened the tensioners, the chain skipped a few times. Now trying to get it back exactly where it was, kind of lost. I do have the timing chain guide from Toyota's service manual, but since things have shifted, I don't want to time everything according to the guide and then have a valve hit a piston, etc. Suggestions?
Oh I had the P0016 code and figured I'd just swap out sprockets on both banks. Lo and behold, the flap door at the end of each spring on both sides was loose and flopping around. Guess I made a good call.
|