[Target70]

Originally Posted by fenton

I've had this happen a couple years ago. It happened when the cable's were too tight, i had a hard shift and the engine moving caused the wires to disconnect and arc. Mine wasnt nearly as bad as your's but we were able to clean them.

Also if they do rub together for long enough the same thing can happen.

sounds like a spacer might be a good way to go just for safety. It sounds like it would be a better design choice to replace the 3 bullet connectors with one single indexed plug, but would probably lead to a price increase.

http://www.andersonpower.com/us/en/p...pole/pp75.aspx

something like this might work, they have multiple colors, look like they lock togeather, and are genderless so can be used on the motor and controller side independently.