Quote:
Originally Posted by mchasteen1
I meant to add a follow up to this, but I got distracted. The wiring DID cause issues for me as well. Powering the V with both the running lights AND the brake light caused feedback in the system that affected other lights (center console and parking/indicator lights for me).
The solution was to take the V off the brake light. That means I connected the red wire directly to the green wire so that it doesn't touch the board at all. Straight up red to green. I've had no problems since then.
|
coool
Thanks for the solution.
Will find time to pull the 4th light to fix it up.
For now i just disconnect the brake light form splice to the rear tail light.
Ya i notice it a while back, but just didn't really pay much attention to it because it see so minor. Until i Drove behind a black truck and see my boomerang light turn on and off when step on and release broke.
But on the BRZ..
If you wire it up like how it is in my image.
The moment you step on brake.(well at least on my car)
The boomerang light and side marker will turn on. Also at the same time The clock display go blank.. and the air bag and driver seat sing on the right hand side of the clock will dim.
When you release the brake,
Clock display come back and other light not dimmed.
Boomerang light and side marker goes off.
Thex to Mchanteen1 one for the solution too