|
You need [ame="http://www.amazon.com/Metra-70-1761-Wiring-Harness-Speaker/dp/B0002BEQJ8"]this[/ame].
Then you need a 28-pin harness, if you don't want to tap power to your factory amplifier. I'm working on a guide but waiting until I get a power module for my reverse camera. I haven't found a harness that just works out of the box, but I took [ame="http://www.amazon.com/gp/product/B00BXF5A74?psc=1&redirect=true&ref_=oh_aui_detailp age_o06_s00"]this harness[/ame] and de-pinned it to salvage the wiring, then repinned it for the amplifier turn-on wire.
Don't forget there's no way to make it look right since the 2016 head unit has slash-cut trim and no trim kit to turn it into double DIN.
The two smaller harnesses are easy to figure out. The brown wire in the 28-pin you will want to attach to your new head unit's amplifier turn-on wire, or the red (ignition switched) wire from the larger of the two.
|