Quote:
Originally Posted by shaynek
Hey guys so I have the newest procede controller and i have a version 1 esc. My esc switch (no partial boost) is a straight wire brown/black (no aux) which goes to the phantom controller. Does anyone know which wire (brown or black) i need to cut and attach to the Procede? I'm guessing brown wire since black is most likely ground
|
You have to use a multimeter to test which wire is ground and which has 5v of current. I don't remember having two wires to the WOT switch. I do remember there being one shielded wire and then copper surroundings. One is ground and one is positive, but you need to test them, as there is not a standard of which is which, since it was before the procede's time. For me, the copper wires was what I needed to tap to the procede. For another member, the single shielded wire was what he needed to tap.
Sent from my iPhone using Tapatalk