Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Blood · 11-20-2015, 09:49 PM

I had this kit installed on my car a couple weeks ago by @moto-mike

I opted for the 90mm pulley (5mm smaller than stock) which runs ~10 psi. My car has an AT and the following mods: P&L catted EL header, Perrin overpipe, Perrin catted frontpipe, Perrin catback, Perrin drop-in filter. Along with the supercharger I had a Perrin oil cooler, Radium PCV side oil catch can and the moto-east flex fuel kit installed.

It made 270 whp on 93 octane pump gas (3rd gear pull) and 291 whp on E70 (4th gear pull).

11-20-2015, 09:49 PM	#146
Blood Senior Member Join Date: Dec 2012 Drives: 2018 STI Location: RI Posts: 167 Thanks: 3 Thanked 59 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	I had this kit installed on my car a couple weeks ago by @moto-mike I opted for the 90mm pulley (5mm smaller than stock) which runs ~10 psi. My car has an AT and the following mods: P&L catted EL header, Perrin overpipe, Perrin catted frontpipe, Perrin catback, Perrin drop-in filter. Along with the supercharger I had a Perrin oil cooler, Radium PCV side oil catch can and the moto-east flex fuel kit installed. It made 270 whp on 93 octane pump gas (3rd gear pull) and 291 whp on E70 (4th gear pull).