Quote:
Originally Posted by KungFuWaffle
Sorry for the revival of the old thread, but if you don't mind, can you show me which bolts you removed and how to pull the bumper slightly to put it on?
|
There are two bolts on top (Arrows marked location on picture).
And then there are two more bolts on the bottom, if you look at the crank pulley, the two bolts are just right across from it, you wont miss it. Once you take the bolts off the frame which holds the hood, it should easily come off. It's super lightweight so this can all be done without needing someone else to help out.
Now all you have to do is just carefully guide the installed filter + intake pipe to the desired location. Once you do so, just reinstall the frame and youre good to go. No worries about worn front bumper retainers whatsoever. Hope this helps.