I received my Spec-D lights from UPS today. Thanks for the speedy shipping @
fteightysix
So here's the low down. I have not installed mine yet but I did some bench testing. I'll post some pics momentarily.
Wires:
Headlamp harness (4 wires)
Red (+12v), Red/Black (Ground) = These toggle the high beam actuator
Blue (+12v), Blue/Black (Ground) = Positive trigger for the low beam headlight. Essentialy these turn the headlight on.
Other 4 remaining wires.
x2 Black (Ground) - x1 ground for the high beam actuator. x1 ground for the LED boomerang, turn signal and low beam headlight.
Yellow (+12v) - Amber turn signal
White (+12v) - LED boomerang
Do you need a DRL mod?
You DO NOT need a DRL mod for these lamps!
Those with the FRS can essentially opt to NOT connect the yellow wire if you don't like the amber within the lamp, after all, you have turn signals in the lower bumper.
For the FRS, if you want the boomerang to remain lit at all times as long as the headlights are on or the parking brake is dropped, you can wire them to the +12v in the turn signal harness. I'll verify which wire this is tomorrow when I complete the install.
The LED boomerang color changes depending on what angle you look at it. I don't believe there is an HID kelvin temp perfect match.
Once I complete the install with my D2S 5K HIDs i'll post more pics.
