Well here's the sort of tools I've created to use to look at the data. This is after some filtering though to clear erroneous data. This is just OL changes. I've already taken into account the LTFT, in this case it's 0 anyway. If you have a LTFT set, fill the AFR column with (100 + LTFT)/100 x Actual AFR (from the log)
Data table:
Comparing original MAF scaling to those derived from the calculations (Resultant MAF):
And a MAFv vs RPM chart. This is useful to know where you are hitting certain MAFv and so you can correlate to CL MAF scaling.
