So most of you know that we had what is now apparently coined the "SC Twins" here over this last week, and @
digital_assassin was nice enough to drive all the way up from Oregon to get his car tuned here @ Drift-Office.
We didn't do the install but here are some pics of the kit - and more pics can be viewed in
this thread that he started for KWSC users.
I don't think I need to regurgitate any more information that you don't already know so here's the Readers' Digest version :
2013 FRS / 6MT Transmission
KraftWerks Supercharger Kit w/ 10 PSI Pulley
STOCK OEM Injectors
STOCK OEM Fuel Pump
OMNI 3 Bar Map Sensor
Drift-Office Custom ECUTEK SPEED DENSITY Calibration
Nameless 2.5 Inch Overpipe, Catted Front Pipe & Axle Back Exhaust
As with the JRSC kit, we opted to also go with a Speed Density (SD) calibration and the kit worked flawlessly when we had it on the dyno.
Here's the DYNO RESULTS!
Here's the YouTube Video!
[ame]http://youtu.be/PJrilzQRCto[/ame]
Cheers!
Bob @ Drift-Office, LLC