Quote:
Originally Posted by ericmpena
So I recently purchased Enkei RSF5's. I want to use my 20mm spacer on the rear wheels but I wanted to ask first what exactly did you mean by "after market wheels will need to have a hole in the back".
|
When you install the spacers the stock wheel stud will stick out past the spacer. So the wheels will need to have an indention in the back of the wheel for the extra stud to fit in. Most wheels have these. Take a look at the back of the Enkei wheel. Next to the lug nut whole. Or post a picture of the back of the wheel.
Charles