Here's the list I compiled with help from @
Jeff Lange describing what all I'd need. Part numbers are on me so if anyone finds an error, please let me know so I can correct the list.
90179-20018 ... Pinion nut
90311-38070 ... Pinion seal
41231-24010 ... Pinion spacer
90366-35133 ... Pinion bearing
*
90311-43009 ... Side seals (x 2)
41222-22010 ... Ring gear lock tabs (x 5)
12157-10010 ... Drain bolt gasket
SU003-00122 ... Fill bolt gasket
(
listed above) ... Pinion bearing shims
(l
isted below) ... Diff washers
**
*Note 1: Pinion bearing can potentially be reused if you or your shop has the removal tool
and your bearing is still in serviceable condition. Replacement is recommended but not mandatory depending on these conditions.
**Note 2: Side washers might be needed depending on the new ring/pinion tolerances. If anyone has any input on this, please add to the discussion.
Diff washers in order of thickness:
90201-52001 ... T=2.58, MARK 01
90564-46014 ... T=2.60, MARK 32
90564-46015 ... T=2.62, MARK 33
90201-52003 ... T=2.64, MARK 03
90564-46016 ... T=2.66, MARK 34
90564-46017 ... T=2.68, MARK 35
90201-52005 ... T=2.70, MARK 05
90564-46018 ... T=2.72, MARK 36
90564-46019 ... T=2.74, MARK 37
90201-52007 ... T=2.76, MARK 07
90564-46020 ... T=2.78, MARK 38
90564-46021 ... T=2.80, MARK 39
90201-52009 ... T=2.82, MARK 09
90564-46022 ... T=2.84, MARK 40
90564-46023 ... T=2.86, MARK 41
90201-52011 ... T=2.88, MARK 11
90564-46024 ... T=2.90, MARK 42
90564-46025 ... T=2.92, MARK 43
90201-52013 ... T=2.94, MARK 13
90564-46026 ... T=2.96, MARK 44
90564-46027 ... T=2.98, MARK 45
90201-52015 ... T=3.00, MARK 15
90564-46028 ... T=3.02, MARK 46
90564-46029 ... T=3.04, MARK 47
90201-52017 ... T=3.06, MARK 17
90564-46030 ... T=3.08, MARK 48
90564-46031 ... T=3.10, MARK 49
90201-52019 ... T=3.12, MARK 19
90564-46032 ... T=3.14, MARK 50
90564-46033 ... T=3.16, MARK 51
90201-52021 ... T=3.18, MARK 21
90564-46034 ... T=3.20, MARK 52
90564-46035 ... T=3.22, MARK 53
90201-52023 ... T=3.24, MARK 23
90564-46036 ... T=3.26, MARK 54
90564-46037 ... T=3.28, MARK 55
90201-52025 ... T=3.30, MARK 25
90564-46038 ... T=3.32, MARK 56
90564-46039 ... T=3.34, MARK 57
90201-52027 ... T=3.36, MARK 27
90564-46040 ... T=3.38, MARK 58
90564-46041 ... T=3.40, MARK 59
90201-52029 ... T=3.42, MARK 29
90564-46042 ... T=3.44, MARK 60
90564-46043 ... T=3.46, MARK 61
90201-52031 ... T=3.48, MARK 31