Quote:
Originally Posted by nzer
Any of you chaps got a link to a reversing camera compatible with the T7019A?
I've been looking at the Tradesolutions HK website but can't find one that says it is for the T7019A.
.
|
Nzer, I bought this one
http://www.ebay.it/itm/360633507954?...84.m1423.l2649
fits very well and operates correctly. Don't forget to wire "reverse" on HU harness (brown) with
pink wire coming from main car harness beside fuse area (pin No. 5). You need 50 cm of adding cable to solder or to join.
You can wire "reverse" to 12+ reargear light when rear gear splits ON.
Main power cord of camera must be wired to red (+) of HU harness (where is there the fuse), and ground (-) obviously.
WARNING:
CHECK WIRING SCHEMA BEFORE OPERATING, THESE NOTES REFER TO BRZ WIRING SCHEMA.
mainly for REAR camera, to operate it needs 12v+ on "HU REVERSE" coming from "rear" gear circuit to start ON DISPLAY , BUT CAMERA STILL NEEDS AT STARTUP OF HU TO BE RECOGNIZED BY THE SAME, THEREFORE POWERED THRU POWER CORD DULY WIRED TOO.