Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Blitz Nur Spec R catback exhaust (https://www.ft86club.com/forums/showthread.php?t=51683)

pcuerpo 11-19-2013 05:14 AM

Blitz Nur Spec R catback exhaust
 
anybody here who has this installed in their 86/BRZ/FR-S? what i see are mostly the Blitz Nur Spec C Ti installed, even searching in Youtube, it's mostly installed in an STi, Supra, etc.

i just want feedback on how it sounds with just an intake and headers installed, i wouldnt want it to be too loud thats why

and the performance, i read here that the Nur Spec C Ti has issues in terms of gains/performance?

below is a quote from that post i read.. click here for the post

Quote:

Here's an earlier response to someone else who wanted to know more. Dyno chart below.

w/ Blitz Nur-Spec C-Ti
"While dyno-ing via DynaPak with the WORKS shop, we discovered the loss of power possibly caused by the muffler after the mid-pipe. Just the sheer size of the muffler indicated that there must be some intricate piping within for it to meet JASMA certification. The guys dynoed with the full exhaust and again without the muffler half. Final dyno results read around a 9-11HP gained difference without the axleback."
and another one but with the same Nur Spec C Ti exhaust had the same experience with power loss or gains without the axleback.. click here for the post

Quote:

Anyone planning to get or already have the Blitz Ti exhaust should know what they're getting less, in terms of power gains.
I had my car dyno-ed this weekend and we discovered that the muffler + pipe diameter withheld power, more than I expected when researching this exhaust. After taking the muffler end off, the dyno showed 10-12HP+ additional gain. No wonder this was JASMA-certified..
and here are pics from Blitz UK, couldnt find them in the US site

http://www.blitz-uk.co.uk/images/pro...s/MT3290_2.jpg

http://www.blitz-uk.co.uk/images/pro...res/MT3290.jpg

so if there is anybody with any experience with this exhaust, i hope i can have your feedback regarding 1) noise and 2) performance.. that would be appreciated :)

Satanasso 11-19-2013 06:27 AM

i searched a lot for this, but seems that this exhaust is "brand new" , in Europe i found only one e-shop that is selling it and there is only one available, coming in on first week of December, i would like very much to hear the sound too ... :)

there is a full Titanium version, but it's quite pricey...
http://image.nengun.com/catalogue/10...r_spec_cti.jpg
(something like 2700Euros...)

pcuerpo 11-19-2013 08:17 PM

yep, they do have a single exhaust with ti tip but it does cost a lot :D

so i guess thats the reason why there's none yet that i see that has this exhaust because its barely new? i was just surprised that there's actually one like this since one of the shops here in our country has already one in stock when i was inquiring about exhausts for the 86 and i even had to check other Blitz' sites to find out that there's one for the 86/BRZ/FR-S :D

kingkenny 06-06-2015 05:12 AM

Does anyone have here have the nur spec R ? From the spec , it look like it is one of quiet single exit exhaust !!

SamGam 06-09-2015 01:14 PM

Very fancy lookin! I don't usually like the single exit exhausts but this is pretty noice!

raian 11-27-2015 08:37 AM

i actually have the spec-r edition. Heres a clip of the sound with stock headers/intake/frontpipe:
https://www.instagram.com/p/-YB7IILt...ken-by=kouhen_

Irace86 11-28-2015 12:24 AM

I had the Nur Spec stainless steel version 3" on my Supra. Compared to others I heard on Supras it was perfect. Not too loud or trying to be too deep or throaty. It was even close to raspy either. Great build quality. Obvious this wasnt on a twin but hope it helps some.

YSoAggressive 07-06-2021 04:04 PM

Anyone have this exhaust setup with UEL headers?


All times are GMT -4. The time now is 04:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.