For Those of Us with a Single-Exit Exhaust
 

Now that I have joined the ranks of the "Single-Exit" club I am looking at my rear diffuser and really wanting something to cover the empty "hole" left over. I don't think that I would want something permanent, but removable, just in case I should ever feel the need to.

Naturally since I track, autocross and show the car, I would want the piece to be secure as well as look good. Since there are no aftermarket parts that fit this role I am thinking of fabricating something that will work well and I may be persuaded to make more than one or for both sides in the event that there is enough interest since a cover for the left side will not fit on the right and vice-versa.

I have pretty much narrowed it down to three possibilities... I can make a paintable, aluminum piece that would work nicely (easiest), I could use a fiberglass or carbon fiber with a clear coat (hardest).

I'll be posting my progress here as I work so if anyone has any feedback, please feel free to chime in!

Scott

http://www.ft86club.com/forums/showthread.php?t=18971
Maybe this will help with your decision making? :)

That looked great.

I feel like I want one, but after decatting my 2nd cat I feel like my single tip is too raspy

Thanks for posting a link to that thread. Its very similar to what I have in mind.

Unfortunately life keeps getting in the way of my side-projects (did I say life? I meant WIFE!). As soon as I can get to work on this, I will let you all know.

Scott

Glad I can help :)

Mine custom exhaust sounds great(no sec cat). Really clean and sporty. I prefer single, this engine is really a good one.

http://www.ft86club.com/forums/showthread.php?t=33375

I made one that turned out pretty decent.

I am installing my single exit exhaust soon. worried about car dynamic more than the other hole. a rear diffuser is a must.

Subbed b/c I just ordered my nameless track pipe.

Sent from my yotaru

I like the fiberglass one. Looks clean.

Roll over to the thread I linked.