Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Make Single Exit look Good (https://www.ft86club.com/forums/showthread.php?t=144298)

Hamza 02-23-2021 06:43 AM
Make Single Exit look Good
 
Hey guys just a short question, I have a single exit on my '13 86 and wanted to ask if anyone knows any way to make it look better on a car that came stock with 2 exits. I know you can get passenger exhaust hole covers but idk I don't dig them personally.

Would be really cool if it could look like that (not sure if there are available diffusers that replace the stock black thing on the back)

https://i.pinimg.com/originals/a2/87...d479d6c6a2.jpg

Cedric 02-23-2021 06:48 AM
You can buy a delete. I got mine on FTSpeed when I bought my Tomei.
https://uploads.tapatalk-cdn.com/202...13d518a132.jpg


Sent from my iPhone using Tapatalk Pro

Cedric 02-23-2021 06:49 AM
Quote:
Originally Posted by Cedric (Post 3408630)
You can buy a delete. I got mine on FTSpeed when I bought my Tomei.
https://uploads.tapatalk-cdn.com/202...13d518a132.jpg

Other than that I’m not really sure.


Sent from my iPhone using Tapatalk Pro





Sent from my iPhone using Tapatalk Pro

Ashikabi 02-23-2021 07:05 AM
Quote:
Originally Posted by Hamza (Post 3408629)
Hey guys just a short question, I have a single exit on my '13 86 and wanted to ask if anyone knows any way to make it look better on a car that came stock with 2 exits. I know you can get passenger exhaust hole covers but idk I don't dig them personally.



Would be really cool if it could look like that (not sure if there are available diffusers that replace the stock black thing on the back)



https://i.pinimg.com/originals/a2/87...d479d6c6a2.jpg
Cut out the black part entirely. Might need a custom or modified axle-back to make it look right though. I don't think there are any real "covers" that will really hide that second hole well

Sent from my ONEPLUS A5010 using Tapatalk

Hamza 02-23-2021 07:53 AM
Quote:
Originally Posted by Cedric (Post 3408630)
You can buy a delete. I got mine on FTSpeed when I bought my Tomei.
https://uploads.tapatalk-cdn.com/202...13d518a132.jpg


Sent from my iPhone using Tapatalk Pro
The cover you mean? I guess that's the only option :l

why? 02-23-2021 08:05 AM
https://www.youtube.com/watch?v=mJ_9Vaez9Hc

something like this. Basically that entire black plastic thing needs to go.

Tcoat 02-23-2021 08:22 AM
Quote:
Originally Posted by why? (Post 3408645)
https://www.youtube.com/watch?v=mJ_9Vaez9Hc

something like this. Basically that entire black plastic thing needs to go.
@Ultramaroon did a center exhaust using the opening for the back up lights that looks pretty good. He never did fill in the holes on either side though!

HKz 02-23-2021 10:36 AM
Or if you have much moneys, there are a couple aftermarket rear bumper with a center exhaust cutout like the LFA inspired bumper or this one which might just be the diffuser part and not the whole bumper

https://bulletproofautomotive.com/wp...frs5-1.347.jpg

And I know toyota came out with a couple special edition bumpers over the years but since jdm only good luck getting one.

https://www.scionlife.com/wp-content...-gallery_3.jpg

Tcoat 02-23-2021 10:38 AM
Quote:
Originally Posted by HKz (Post 3408679)
Or if you have much moneys, there are a couple aftermarket rear bumper with a center exhaust cutout like the LFA inspired bumper or this one which might just be the diffuser part and not the whole bumper

https://bulletproofautomotive.com/wp...frs5-1.347.jpg

And I know toyota came out with a couple special edition bumpers over the years but since jdm only good luck getting one.
https://j.gifs.com/y491Pj.gif

HKz 02-23-2021 10:43 AM
Quote:
Originally Posted by Tcoat (Post 3408680)
I see quite a few singles in there 😄 welfare rain!

Mike_ZN6 02-23-2021 10:54 AM
https://i.imgur.com/o0BIePM.jpg


You could cut away part of the bumper and build a custom diffusor. It would look similar to the WRX you posted.

Hamza 02-23-2021 12:00 PM
Quote:
Originally Posted by HKz (Post 3408679)
Or if you have much moneys, there are a couple aftermarket rear bumper with a center exhaust cutout like the LFA inspired bumper or this one which might just be the diffuser part and not the whole bumper

https://bulletproofautomotive.com/wp...frs5-1.347.jpg

And I know toyota came out with a couple special edition bumpers over the years but since jdm only good luck getting one.

https://www.scionlife.com/wp-content...-gallery_3.jpg
I probably should have clarified I meant side exit not center haha my bad but those do be looking real nice

Hamza 02-23-2021 12:01 PM
Quote:
Originally Posted by Mike_ZN6 (Post 3408683)
https://i.imgur.com/o0BIePM.jpg


You could cut away part of the bumper and build a custom diffusor. It would look similar to the WRX you posted.
okay that is actually quite cleannn, wanted to ask though do you have to cut or is it just removable with clips because from below you can see clips?

Mike_ZN6 02-23-2021 12:04 PM
Quote:
Originally Posted by Hamza (Post 3408695)
okay that is actually quite cleannn, wanted to ask though do you have to cut or is it just removable with clips because from below you can see clips?

That is not my car, but I think you have to cut the lower portion off your rear bumper.


All times are GMT -4. The time now is 04:42 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.