Is your car on RCE Yellows? Let's see your wheels!
 

So I'm trying to figure out what size and offset I should get for wheels. I also need to figure out sizing for the tires. I've looked and found a few people with these springs that have different wheels, but they are scattered throughout the forum. If you would, please post a picture of your car with its Yellows with the wheels, and then list all the specs for the wheels and tires.

I know that there is a great guide for fitment in this section, but I want to see pictures to see just how it looks. Also, if any camber adjustments or anything else has been tweaked, please also list that.

:thanks:

Im still debating on whether or not I should install the Pro Kit sitting in the trunk or return them for the Sportlines that I originally wanted. XXR 530s already on the way. Subbed for height drop pics.

So I guess other people with Eibach Pro Kit and Hotchikis springs can also upload their pics since they all lower 1"?

RCE Yellows only lower .8" or 20mm

18x8 +45 Enkei Raijin with 235/35/18 BFG GForce TA on RCE Yellows


http://i.imgur.com/BaqG0.jpg

http://i.imgur.com/kVjGLY2.jpg

That's really clean. I am considering Racecomp's springs since it maintains most of the OEM ride height. Glad to finally see a pic with them installed. :w00t:

:thanks: Tons more pics in my build thread.

This is why I'm here, didn't mean to derail the thread.

Technically the reason I'm asking for only RCE Yellow owners is because it's less of a drop than those springs you mentioned. But if those owners want to also, I guess it's close enough. I just want to see what people are doing and how they like the fitment.

I took a pic at lunch just for you. RCE Yellows, wheels are 17x9 +45, Toyo T1 Sport 245/40 tire, 3mm spacer in front.

Rub in rear?

No signs of rubbing front or rear.

Hey Husker741,

Here you go, RCE Yellows, Crash camber bolts top and bottom strut (-1.8 Camber) on 17x9 Volk TE37V wrapped with cr!p Dunlop DZ101 245/40/17 rubber square.

http://i.imgur.com/emlTqx7.jpg
Sorry, only close up.

http://i.imgur.com/XHZ6n5u.jpg


http://i.imgur.com/lrBgfs1.jpg


http://i.imgur.com/vMy2cFw.jpg

No rubbing issues, everything works perfect.

Cheers,

Sam

And front shots of these cars? I wanna see the poke in the front, that's my biggest concern.

Here are a few which should help show the poke from the front, keep in mind these are +45 with a 3mm spacer for an effective +42 front offset.