Wheel Directory: Work VS-XX 18x9.0 +33 / 18x10.0 +33
 

http://www.darrendriven.com/ft86/title.png


Hi guys!

Recently, i have find a set of work vs-xx in 5x100 (18x10 +33, 18x9 +21) , I thought the wheels would not go and would rub on the body but surprise ... all is okay. Here are some pictures but i will post more soon..

What tire size? And MOAR PHOTOS!

so classy (nods head) is that stock height?

no its on bc rancing coilovers but im not slammed lol..

225/40/18 all around

I'm not sure those offsets are correct... the VS-XX is a 3-piece wheel and the offsets can't change from what is offered.

And those offsets (on the car, as-listed) are not offered.

What offset are they?

http://www.workwheelsusa.com/media/w...-XX%20Spec.pdf

-alex

Sick

looks really nice! and its not rubbing because your not low enough..haha

Would really help the community if correct offset info was posted...

-alex

oups sorry ...corection: 18x9+21, 10+33 .. maybe different offset beacause the step lips... idk..

I don't see those offsets in those sizes in the Works Catalouge, in either of the 3 centre disk options. Unless I'm blind..

yess but look at vrmotoring.com and you can see many set have not the offset in work catalogue... maybe a special order idk...

could be special order man

You can't customize special order 3-piece wheels that go beyond what the manufacturer offers.

There's only 3 parts to a 3-piece wheel: inner barrel, outer barrel, and center disk.

The center disk is always of a fixed design, usually R-disk, A-disk, or O-disk for different caliper clearance.

The inner/outer barrel is also of a fixed design in the sense that when pieced together, they create the width of the wheel.

So given those 3 fixed parameters, you do not have "custom" offsets available... to be honest, every multi-piece wheel anyone will ever order will always be custom because they are made to the order.

I really suggest you (or anyone else researching) to actually look at the link I posted. You CANNOT order a Work VS-XX beyond what is listed in the PDF... unless you shave the backpad of the wheel 2-3mm to get more offset. But, Work won't do this for you since it won't meet their safety compliance in Japan.

-alex