|
Some initial driving impressions:
This car is ridiculously telepathic. It goes where I want it to before I even realize I'm turning the wheel. They nailed the electric steering. The upgraded Sachs dampers that come with the Performance Package are quite good. It corners nearly flat and rides well on bumpy roads. The power is almost perfect for the stock configuration. I agree that it could use a bit more punch (tune + headers should do it..for the near future), but I love the feeling of getting to row through the gears and carry momentum through the corners. It feels happy when revving high. I love the lack of sound deadening. Its great to hear and feel the engine/road/clutch/etc. All part of the experience. Coming from noisy Ducati race bikes, I love hearing everything as I drive. It is a great car to learn on. The transmission and clutch are predictable and relatively forgiving. I would argue that 1st gear is too short, however. Shifting into second took some getting used to compared to other cars. The feeling of the low seating position cannot be overstated. It makes you feel like you're driving a Porsche. An M2 or Focus RS feel like driving an SUV by comparison. Overall, I'm having a blast. Still not a proper build for some months to come...but the parts stockpiling has begun. https://i.imgur.com/Xlh5Pbg.jpg https://i.imgur.com/yUxdgxh.jpg https://i.imgur.com/as0sIQY.jpg https://i.imgur.com/UhX9tAJ.jpg https://i.imgur.com/VRrNi6k.jpg https://i.imgur.com/WtRxA3Y.jpg https://i.imgur.com/Nky0IAu.jpg https://i.imgur.com/kbOF1Tt.jpg https://i.imgur.com/8Vr77yS.jpg https://i.imgur.com/gYgwrUs.jpg https://i.imgur.com/B8tjEOU.jpg https://i.imgur.com/UdZ7Fux.jpg https://i.imgur.com/uFpcUOI.jpg https://i.imgur.com/p6J1wZ1.jpg |
Hey, another Seattle area BRZ owner. Welcome to the family. Were those pictures taken at Redmond Town Center?
|
you're a great photographer! Excited to see where this build goes. I know we have similar taste in wheels already :P
Quote:
|
Quote:
Good eye--that is RTC. I was headed home after a long drive through Duvall/Carnation and decided to snap a few in the parking lot. |
Quote:
Shhh don't ruin the 17x9 15.6lb surprise :thumbup: |
Quote:
|
Quote:
|
A few little bits arrived this week. Nothing terribly exciting, but important nonetheless. I needed to refresh my washing gear, and after going down the rabbit hole of car wash forums to get some advice, I put together a simple package.
2x Adam's Polishes Bucket + Grit Guard These are arguably too expensive for what they are, but I know they are built very well, so I don't mind. https://i.imgur.com/sKpmjXc.jpg https://i.imgur.com/01M4Gfx.jpg Chemical Guys Microfiber Towel + Chemical Guys Microfiber Wash Mitt https://i.imgur.com/eQUkAjs.jpg https://i.imgur.com/LF2owN3.jpg ABN Wheel Woolies These things are great. I've used them for one wash already, and they do their job wonderfully. No damage to the wheels. Hard to clean after use, however. No surprises there. https://i.imgur.com/qwSSGDu.jpg Sonax Wheel Cleaner + Adam's Polishes Shampoo Sonax is a known quantity--nothing more I need to say about it. I want to try a bunch of different shampoos. I heard good things about Adam's stuff, so I'll give it a shot. https://i.imgur.com/csabuGO.jpg |
I finally got around to doing the clutch return spring delete.
Wow. I'm amazed they still ship this car with the spring. Like many others, the BRZ made me feel like an MT amateur with its unpredictable clutch bit and vague feel. After a couple weeks of driving it, I think I basically just relied on muscle memory to get it right. But even so, I'd still royally mess up starts and 1->2 shifts at an alarmingly high rate. Installation thoughts The delete is relatively straightforward. I'd highly recommend getting a buddy to hold down the clutch pedal with a broom handle while you're hips-deep in the footwell. I ended up using a few zip ties to hold the mount that gets left behind. It bugs me a little bit to know I've already used zip ties on a brand new car, but at least it isn't a mod I ever plan to undo! No photos of the delete since its been covered fairly extensively around the forum. I cleaned up the spring and promptly locked it away, hopefully never to be seen again :thumbdown: Driving impressions Straight away I can say that this is probably the best modification you could do to this car. The clutch pedal is now firm but predictable. It feels like a real MT now. The bite point is so much more obvious, and I find myself exercising much finer control at slow speeds and hill starts. The spring was less of a problem when you were up to speed, but it was a huge pain coming off of stoplights or putting around parking lots. A lot of people seem to say the pedal isn't actually any stiffer. It definitely is. If you haven't driven MT cars before this, it might heavy to you compared to stock. However, the pedal is still much lighter than my brother's '16 Mustang GT. Nothing to worry about. There is a tiny bit of play at the top of the pedal's travel as everyone says. Its so minor that I forgot about it after 5 minutes of driving. No problems there either. All in all, I'm thrilled with this tiny little "mod" to the car. Its important to me to get the most out of the essentially stock car before getting into "game-changer" mods like coils, tunes, FI, etc. https://i.imgur.com/WzlzSkB.jpg |
I like this thread! Very well written mini-reviews
|
MTEC Shifter Springs + Perrin Rear Shifter Bushing + Whiteline Transmission Insert
These mods are considered 101 for this platform, but I'm super excited regardless! The gearbox is great from the factory, but there are some small improvements to be made. Many thanks to Speed Factory for the quick delivery.
MTEC Shifter Springs I'm hoping this will guide 3rd->2nd and 4th->5th a bit more cleanly. I don't have any consistent problems with those shifts right now, but these will hopefully tighten up the travel and make those shifts a bit more fluid. 3rd->2nd is far and away the hardest shift to nail on the BRZ, and is met with the most resistance. I find 5th->4th very fluid and natural, but 3rd-2nd can put up a fight. Here's hoping this takes some of the edge off. Its very easy to botch this install--still undecided if I will have my shop fit these or not. https://i.imgur.com/MSnjj1p.jpg Perrin Rear Shifter Bushing More of the same here. Hoping to reduce any play/sloppiness in the stock setup. This one will also be a pain to install, but certainly easier than the shifter springs. Bought as part of the Positive Shift Kit with the Transmission insert below. https://i.imgur.com/eHF9e3I.jpg Whiteline Transmission Mount Insert This one went straight on the car--I didn't even pause for a picture. Spoiler: It is a piece of black urethane! Whiteline no longer appears to make their products in yellow. Installation thoughts Although most walkthroughs have you remove the front pipe and the entire crossmember to install this, there is a less involved approach that saved us having to buy new gaskets and drop the pipe. We put the car on stands, removed the engine & transmission covers, and supported the transmission on a jack. I supported the front pipe with a wood block, and removed the FP hanger. Removed the 17mm center bolt on the transmission mount, and raised the transmission ever so slightly. From there, all that was required was greasing up the insert, having my buddy hold up the center bolt, and the insert went right in. I cleaned up the grease, threaded the 17mm bolt back on, then the exhaust hangers, then the engine/trans covers. Job done. I'm sure someone will come along and tell me I should't have raised the transmission. It was probably only 1cm--I'd imagine it sees much more movement just driving around. I wasn't worried about it. The install took us a few hours. More experienced owners will be able to do this in much less time. Driving impressions I fired up the car and immediately noticed an increase in both vibration and exhaust volume. There's much more noticeable high-frequency vibration, and because the FP is hung from the transmission, it seems to resonate through the car much moreso than stock. Backing the car out of the driveway was enough to tell me that this was going to be a great addition. Even small amounts of throttle send great feedback through the whole car. You feel the car beneath you with much greater fidelity. Now comes the good part. 1st/2nd/3rd pulls. Two words: gearbox whine. Glorious gearbox whine. It honestly sounds bit like a subtle sequential gearbox. Its VERY noticeable in 1st and 2nd, and starts to trail off around the end of 3rd gear. I don't notice it much in 5th. Cruising in 6th at 2500-3000 will bring back some of the whine as well. I LOVE it. The best way I can describe it is that it sounds as if you are hearing the transmission through your shifter assembly/dash. Its just there. You instantly feel so much more connected to the drivetrain. The whole car comes alive, and feels more raw and authentic. This may be a subtle mod, but it made a huge difference to me. After a day of hard driving, I can confirm that it does its job where it needs to. Under heavy load, shifts feels more crisp and connected. Shifts are less upset by bumpy surfaces, and overall it removes some of the slop. If you haven't done so already, buy it. You won't be disappointed. I do have my concerns about stiffening only this section of the transmission. I'll likely get some engine mounts as well as I start to drive the car harder. https://i.imgur.com/ZGauU6N.jpg |
Long weekend = lots of great seat time in the car. Learning a ton. Does anyone have experience with larger throttle pedals? I agree with many that it is much too far away from the brake. I can heel toe fine, but it took some getting used to.
https://i.imgur.com/o3gFDxF.jpg |
Quote:
|
| All times are GMT -4. The time now is 05:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.