*** Aggressive wheels? Post them up! *** Thread
 

I realize we don't have a thread for BRZ/FRS with aggressive wheels set-up. Many other forums have a consolidated thread for cars with aggressive wheels so why don't we have one right? I'm big fan of having aggressive wheels, and no, it doesn't necessarily mean it has to be slammed and hellaflushed. It can be just slightly lowered and with fat tires as well. So instead of going each member's build thread and check, let's have one consolidated thread so owners with aggressive wheels share their set up. We can also ask questions about offsets, width, tire sizes, etc. as well.

Requirements for aggressive are:
- Low offset wheels that sit flush with fender or poke a little.
- Stretched tires or fat tires don't matter since everyone has a different view about this.
- Slammed or slightly dropped don't matter neither since everybody has a different view about function > form or vice versa. It doesn't have to be slammed to be aggressive IMO.

***Disclaimer: I don't have an BRZ/FRS yet. Still waiting for more news and info of what is going to happen in 2014.

Pick your rocket bunny car and post. Chances are it's pretty damn aggressive.

^ My rocket bunny car? :iono:

18x10 +12
18x10.5 +17
225/40/18 all around
Roughly -6 degrees camber
Extensive fender mods

http://cdn2.mkimg.carview.co.jp/mink...t=b0082b4b2864

http://cdn2.mkimg.carview.co.jp/mink...t=b0082b4b2864

http://cdn.mkimg.carview.co.jp/minka...6f2a9517a0.jpg

http://cdn.mkimg.carview.co.jp/minka...d4a2b7df97.jpg

http://cdn.mkimg.carview.co.jp/minka...64a59a2994.jpg

Ebphoto's car . Hope he doesn't mind me sharing. ;)

18x9.5 +25
225/40/18
front rolled/slight pull and rear was pulled

http://farm9.staticflickr.com/8457/7...9e833d8c_c.jpg

http://farm9.staticflickr.com/8174/7...ebaa339d_c.jpg

http://farm9.staticflickr.com/8359/8...e578730f_c.jpg

Ill roller's car

18x9.5 +38
Front: 225/40/18
Rear: 255/35/18

http://farm9.staticflickr.com/8355/8...1dcae97d_o.jpg

http://farm9.staticflickr.com/8487/8...bb68cfb3_o.jpg

http://farm9.staticflickr.com/8224/8...3e937419_o.jpg

18x9.5 +30
225/40 front and 245/35 Rear

http://25.media.tumblr.com/tumblr_m5...lclo1_1280.jpg

http://i57.photobucket.com/albums/g2...2/toyota86.jpg

19x10.5 +32
235/30/19

http://farm9.staticflickr.com/8485/8...7e9334f0_b.jpg

http://farm9.staticflickr.com/8337/8...a49cbcd0_b.jpg

http://farm9.staticflickr.com/8207/8...56c9a890_b.jpg

http://farm9.staticflickr.com/8487/8...e406607f_b.jpg

http://farm9.staticflickr.com/8337/8...a7fe1ea4_b.jpg

http://farm9.staticflickr.com/8477/8...a1520c94_b.jpg

AE86guy's car.

18x9.5 +40 (front has 5mm spacer)
265/35/18
No fender mods

http://i49.tinypic.com/b87dqw.jpg

http://i46.tinypic.com/34ipgeq.jpg

Do you know if any fender work was required on these? They look great!

Sure, I edited the posts showing the fender work that was done to the cars, as far as I know. If it's blank, it's cause I'm not sure.

Nice start on this thread Larry!

Wow! They did an amazing job, can't even tell it was done from what I can see.