FI Dyno thread
 

I wanted to make an archive of people's best dyno run with their configuration.

Please ONLY POST a DYNO (there is no need to comment)

Format:

- Name/Screen Name
- Force Inducted Kit
- Fuel Type
- Max Boost
- Other Mods
- Other Notes/Conditions, Tuner, etc. (include link to other thread where people can go comment/ask questions if desired)
- PIC OF DYNO


If you have any comments or suggestions feel free to PM me, let's try and keep this clean and a valuable resource.

- Jon Swift/Swift996
- Innovate Supercharger (Tuner Kit - Stage 1) Tuned by Moto-East
- E50
- Provided Pulley ~7PSI
- K&N Drop-In Filter, FA20Club Catted Header, FA20Club Resonated Front Pipe, 700CC Injectors
- 4th gear pulls, 102F degree ambient temps (ran 180whp on different DynoJet prior to supercharger)
http://i.imgur.com/CMXlpPv.jpg

- Chris Tuttell / King Tut
- Full Blown Motorsports Stage 1 Base Turbo Kit
- 93 Octane/Bosch 550cc Port Injectors/Full Blown Fuel Pump
- 12.5 psi
- Garrett GT2871R Oil/Water Cooled Ball Bearing Turbo, Precision Turbo 39 mm External Wastegate, Tial 50 mm Q Blow Off Valve, Go Fast Bits G-Force II Electronic Boost Controller, JDL Auto Design 2.5" Overpipe, JDL Auto Design 2.5" Frontpipe, GReddy Evo3 Exhaust, ACT Heavy Duty Pressure Plate/6 Pad Sprung Race Disc Clutch, ACT XACT Prolite Flywheel, D3 Performance Engineering Catch Can
- 90F+ Temps, Rain, 4th Gear Pull

http://brz.ridedomain.com/dyno/sae.gif

Dave / Sportsguy83
- AVO Stage 2+ Turbo Kit
- 93 Octane/SIR 500cc Port Injectors/DW 65c Fuel Pump
- 14 psi
- AVO 18/49 Oil/Water Cooled Turbo (TD05 18g) internally gated, AVO 50/50 BOV, Perrin Manual Boost Controller, Nameless 3" OP/DP, Midpipe and Axleback, Clutchmasters FX350 Clutch Kit, D3 Performance Engineering Catch Can
- 90F+ Temps and Rain, 4th Gear Pulls.
- Will be doing E85 Dyno tune soon, will update post with new numbers ASAP.
- Turbo Experience Thread
- Member Car Journal


https://lh5.googleusercontent.com/-S...%2520Power.jpg

Brandon/lexusb3
Fa20club.com kit
e85
16psi
3inch exhaust custom, fuel pump, 550 injectors :)
90degrees 29 humidity -_-
Signature has my build ( just click it)

- nix
- AVO turbo kit
- Flex fuel (98 RON to e85)
- 14.7 psi
- Stage 1: AVO air filter, AVO oil breather tank, Perrin 2.5" catted unresonated exhaust, Perrin crank pulley.
- Stage 2: + Omni map sensor, Spray it Racing 500cc port injectors, SPD290 Fuel pump, Zeitronix flex sensor.
- Driveline: ACS chromoly flywheel & 830kg DCB clutch kit, STI engine & trans mounts, whiteline diff & outrigger inserts.
- Journal thread

-Baseline of 108kw = 145 hp. Dyno reads ~15% lower than dynojet. Original & converted dynojet numbers below for comparison.


Stage 1 AVO base map (98 RON, 4.5 psi) vs stock baseline (98 RON). 140 rwkw / 188 whp / 215whp.
*This was from Ross Wilson @ AVO JDM.

http://farm9.staticflickr.com/8467/8...d6d35819_c.jpg


Morpowa flex tune E78% - AVO stage 2 actuator - 8.5 psi. 217 rwkw / 291 whp / 335 whp.

http://farm8.staticflickr.com/7282/9...a3c1c431_c.jpg


Power starting to top out on e70 and 14.7 psi. 247 rwkw / 331 whp / 380 whp.

http://farm9.staticflickr.com/8539/8...1fb1ec66_c.jpg

Michael/WRXgoose
Innovate SC
93 oct
7.5psi iirc
Borla UEL headers, Perrin 3" header back exhaust
note: this is not a finalized tune, I need to get back and have it fine tuned to where I want it.

http://i2.photobucket.com/albums/y7/...ps7513bd65.jpg

- Paul Hansen/AVOturboworld
- AVO Turbocharger Kit Stage 1.8.2
- 92 octane (10% ethanol)
- 10.92
- AVO header-back exhaust, AVO high-flow Panel Filter
- http://www.ft86club.com/forums/showthread.php?t=13156
Note: This is an old chart, currently working on the bigger/better/faster version.

http://www.avoturboworld.com/media/b...ge_1_8_001.jpg

- fenton
- Phantom Electric supercharger
- 94oct(10% ethanol)
- 4psi - 1.6psi at peak power
- Otherwise stock
- First designed kit, new compressor in development. - Build thread - http://www.ft86club.com/forums/showthread.php?t=39719


http://i1277.photobucket.com/albums/...pscb681db7.jpg

-Chris/mack4477
-FBM Stage 1 Base Kit with GTX2867 upgrade
-E85 @ 16 psi
-93 pump @ 10 psi
-Dyno tuned by LJ @FullBlown
-FBM 3" exhaust, 1000cc injectors, upgraded fuel pump

http://i43.photobucket.com/albums/e3...ps5fb29642.jpg

Owners name: Fabron / Fabron757
Kit: Custom kit built by Trust Automotive using efr 7064
Fuel: e85
Other mods: fuel pump, injectors, catch can with drain back to oil pan, full 3" turbo back exhaust w/ no muffler only cat and resonator, all hot parts coated, Koyo Radiator, Spal fans, remote mount oil filter and large oil cooler, aem wideband fail safe, CLutch Masters FX400
Tuned by: Trust Automotive using EcuTek Race Rom, tuned on 16 psi
http://www.ft86club.com/forums/showthread.php?t=31807

http://i1282.photobucket.com/albums/...g?t=1374605589

Vortech supercharger, 8.5psi pully moto-east tuned
92 WAWA gas
Borla header, perrin cat back
Stock injectors/pump
Terminated dyno tuning early, upgrades were on the way, needed something that ran.

http://www.moto-east.com/dynos/ft86/..._brz_263hp.png

No more?

- Pete
- Vortech Kit
- 93 octane
- 9 PSI
- Borla UEL headers, Perrin Headerback
- Perrin Tune
- Blue line is old 7 PSI blower, not sold anymore

http://i177.photobucket.com/albums/w...psc7021a1e.jpg