Vin's EUDM GT86 TRD OEM++
https://lh3.googleusercontent.com/aZ...=w1571-h883-no
Final form interior and exterior wise, just waiting for funds to go FI :D https://lh3.googleusercontent.com/OP...=w1325-h883-no https://lh3.googleusercontent.com/xA...=w1325-h883-no https://lh3.googleusercontent.com/X3...=w1325-h883-no https://lh3.googleusercontent.com/eo...=w1325-h883-no https://lh3.googleusercontent.com/IN...=w1325-h883-no Hello, After browsing this forum a lot let me introduce myself. I'm Vincent, 29 years and a Toyota addict since ever. My dad drove Toyota since I can remember and is now driving a Lexus. My Toyota journey started with a Yaris 1.5 TS, pretty little sleeper: https://lh3.googleusercontent.com/-E...ortAchter3.jpg Used that to go to college, after that I got a 2002 Celica T-Sport (similar to GT-S in the US, so with the high reviing 2zz engine). It was a pre-facelift which slowly turned into a modded facelift: From (some old NewCelica.org members might remember the cars below): https://lh4.googleusercontent.com/-M...0/_DSC6774.jpg To: https://lh3.googleusercontent.com/BB...E=w800-h600-no After two years I got a real 03+ Facelift TS, so with OEM HID, nice interior, etc, modded this car also: From: https://lh6.googleusercontent.com/-9...o/_DSC0569.jpg To: https://lh3.googleusercontent.com/RQ...=w1260-h840-no https://lh3.googleusercontent.com/dL...=w1260-h840-no https://lh3.googleusercontent.com/9U...=w1260-h840-no When Toyota announced the ToyoBaruScion FRS86BRZ in 2012 I really wanted one, however they were very expensive over here, close to 55k USD new. Now after 4 years more than 50% of the value is gone so I just had to get me a 86 :laughabove: Found a nice low milage white one, pretty stock apart from the TRD door stabilizers and custom leather interior: https://lh3.googleusercontent.com/Gw...=w1200-h900-no Fitted the OZ wheels from the Celica https://lh3.googleusercontent.com/gL...=w1350-h900-no BC Racing BR coils: https://lh3.googleusercontent.com/dg...=w1350-h900-no Some bling bits (TRD+CUSCO) https://lh3.googleusercontent.com/q1...=w1350-h900-no https://lh3.googleusercontent.com/RJ...=w1350-h900-no TRD bodykit, new exhaust, red tails https://lh3.googleusercontent.com/I6...=w1350-h900-no https://lh3.googleusercontent.com/2w...=w1352-h900-no https://lh3.googleusercontent.com/pt...=w1352-h900-no https://lh3.googleusercontent.com/8E...=w1352-h900-no Interior, TRD + Carbon + Leather: https://lh3.googleusercontent.com/JT...=w1350-h900-no https://lh3.googleusercontent.com/q5...=w1350-h900-no Subaru Forester heat exhanger / oil cooler: https://lh3.googleusercontent.com/in...=w1350-h900-no Specs Exterior -TRD front spoiler -TRD skirts -TRD Rear bumper lip -Loden emblems "86" logos -Rear view camera -Tom's tail lights -OEM shark Finn antenna -Daniel ducktail -TRD Aero Stabilizing cover Engine/power/engine bay -Kinugawa UEL header -Kinugawa downpipe -Custom 2.5" high flow exhaust -Open Flash Tablet with custom 102 STG 2 tune -HKS panel filter -Modded inlet snorkel -Supertek intake pipe -TRD oil cap -TRD Radiator cap -TRD short shifter -Hood dampers -Subaru Forester Heat Exchanger -Racerx oil catch can -TRD oil filter Interior -Carbon dashboard covers -Carbon arm rest covers -Carbon ebrake -Carbon steering insert -P3cars gauge -RedlineGoods leather gauge hood cover -TRD Shift knob -TRD Start button -TRD Interior Boot set -TRD steering wheel -Aluminum reverse lockout -Custom leather seats -TRD Door stoppers -Joying Android Radio -Black TC buttons and AC pillars -Aluminum AC buttons Handling -Cusco Carbon Strutbrace -BC Racing BR coilovers -17" OZ Superturismo LM -18" Team Dynamics 1.2 -STI 08+ Brembo with EBC GD discs all around |
Welcome, can't wait to see what you come up with!
|
Very clean celicas and welcome to the forums :)
Nice to see someone coming from prior toyotas to the new kid on the block |
Quote:
Actually, I came from a 78 Corolla but we'll ignore that. Sent from my SM-G935V using Tapatalk |
Thanks! Corolla ftw, my journey also started with a Rolla, a 1998 1.6, but no pictures of that one and not really worth mentioning
|
Quote:
Sent from my SM-G935V using Tapatalk |
Rolla's are the most reliable cars in the world :)
So first the bad, ordered the TRD bodykit, was told the ETA was 1,5 weeks. Well it turned out they were out of stock in whole Europe, so now they are getting shipped from Japan by boat...........ETA = 2,5 months :barf: In the mean time: https://lh3.googleusercontent.com/7B...=w1209-h906-no Installed Lodem emblems Installed a rear camera (OEM Toyota accessory in the Netherlands), very good image quality but also very bulky, so made a cut-out in the trim so only the lens pokes out, looks really oem: https://lh3.googleusercontent.com/i5...=w1209-h906-no Furthermore bought a Kinugawa UEL with downpipe, I hear you thinking ... Kinuwhat? Well it turns out these guys also manufacture the Tomei and Gruppe S, bought it for a steal (425 USD :D) and it already should arrive next week. Will run it with a 02 spacer for while. Eventually get a tune.. http://shopping.kinugawaturbo.com/im...Zmanifold1.jpg And so the story continues. Will attend the first meeting with this car next weekend :D |
So the manifold has not arrived yet, hopefully it will arrive next week so I can install it during the weekend.
Also installed some new stuff (gift from my dad, it's awesome sharing the same hobby) and attended my first meet with the 86. I was the only 86 present Cusco carbon strutbrace, really nice fit and finish with integrated brake stopper :) https://lh3.googleusercontent.com/oB...=w1359-h906-no https://lh3.googleusercontent.com/yq...=w1359-h906-no Some more TRD stuff https://lh3.googleusercontent.com/aK...=w1359-h906-no https://lh3.googleusercontent.com/Np...=w1359-h906-no And some hood dampers, works great and tbh the car should have come with these stock. https://lh3.googleusercontent.com/Sl...=w1359-h906-no Meeting time: https://lh3.googleusercontent.com/S8...=w1359-h906-no https://lh3.googleusercontent.com/gQ...=w1359-h906-no https://lh3.googleusercontent.com/_S...=w1359-h906-no |
Wopwop my Kinugawa UEL header + overpipe is in the house. I'm no expert, but doesn't look bad for €535/$595 incl tax (21% in the Netherlands and shipping from Taiwan):
[img]https://lh3.googleusercontent.com/qZzfRllBndoQibxc_wVPrmQugBmuyc_9ip9OAQPErpUpkUrjo7 Vam1G3rvL7ZF6vewFNNWqBczywpL-36kGTi2GGu4qCD_chsUWPbbmG_wnNsHVAfLnm04zxTdPDZaJZU tdZtAoYa-LxNxHBoG-QUfyCwpowJhBEGu8uBkNIv7i0P7rcn7-yF6PiytqzoHc5EVn0hdWVTkXa6RxVWHiyIBy3LZnmZuJKI8sha ytFpRjwbxz7***gIy-hDVb4tYl9iQKpcgF1Jw8z-Cxo5rpJ-wzt1qqpNkC2DqXloDM45VDy3b6EM-GBnWcX0vpuUDl8ZrJmfAKShZDHY41brJLv4CxauwQg-r4W0MlD2hix1g3r_MYbdMWZ0-amOPCb303tR2rWxQkZ68gIay9iNozkO50Aqyw5cuHI63L4T_Qf AFlLacw2G7zKW7suHURMwzjubhxkucSxuME3mA0Qp3O5KDp5Ai NRkVlY0o7eb2TapYvJflchsf2DAmidetz4tfNqXeYV_zm-l_6qQcuZR9G-NCmQXQPuha8xuPcd_jRLBNVZiozab3Zmu27jZ-VgV6EcFRC-c6I11_SimMgx2wyfiiMZopuWLoAO0CMLVg5Pgv6mQTq3_Q=w12 60-h840-no[/img] https://lh3.googleusercontent.com/ii...=w1260-h840-no https://lh3.googleusercontent.com/pI...=w1260-h840-no https://lh3.googleusercontent.com/6P...=w1260-h840-no https://lh3.googleusercontent.com/g4...=w1260-h840-no https://lh3.googleusercontent.com/V3...=w1260-h840-no https://lh3.googleusercontent.com/8I...=w1260-h840-no https://lh3.googleusercontent.com/tt...=w1260-h840-no |
Had the rear 20% tinted. On the Celica I could do this alone, but the 86 is very hard to reach, so had it done by some pro's. Really nice result:
http://i864.photobucket.com/albums/a...pss4fqswx9.jpg Also found a very cheap and nice (plastic) TRD mod :) http://i864.photobucket.com/albums/a...psxmmmxcrl.jpg Installed the UEL header yesterday. I've coated it with VHT flameproof, searched for a profi job, but unfortunately this costs more than the header here in the Netherlands, so decided to do a DIY job. Installion was very easy with access to a lift, had to raise the engine a bit for the downpipe swap. Very pleased with the result, this really changes the car, I feel more power, but also it sounds so much better, this is how the car should have sounded stock. Still debating if I should change the rest of the exhaust too, but afraid it will be to loud http://i864.photobucket.com/albums/a...pssksjo1eo.jpg This is how it sounds, sound even better when it's really hot. I'll post a new video soon: [ame="https://www.youtube.com/watch?v=Loma4nHLWoU"]Toyota GT 86 with Kinugawa UEL header and downpipe, stock exhaust - YouTube[/ame] |
So this will get fitted next Friday :). Will probably look silly with the single exit exhaust (until I can afford a custom quad pipes setup that is)
http://i864.photobucket.com/albums/a...pswk6ldcaf.jpg Also the cold start with the uel was way to loud, even with the stock front pipe and cat back so went for a tune http://i864.photobucket.com/albums/a...pswqx7aebo.jpg Running an of the shelve tune right now, will go for a custom tune when the intake and exhaust setup are finished Made a small video with some more sound files and launch control, you just have to love launch control, car does 0-60 in just over 6 seconds now :) https://youtu.be/AG7Ox3flsfk More to come soon :) |
Is it possible to have a catless header in the Netherlands?
|
Yes, our neighbors (Germany and Belgian) have very strict rules but we just need to have one high flow cat to pass emissions and that's it. You can bolt on pretty much everything on the car, we don't need to have any of the parts certified like the tuv in Germany. I love my country when it comes to modding
|
So couple of changes
Received the first parts of my interior overhaul. Carbon galore :) https://lh3.googleusercontent.com/N8...=w1199-h899-no Also fitted a new intake (because more noise, and bought second hand very very very cheap). Really curious if I can get the LTFT with the tune in control. Otherwise I'll change plans again: https://lh3.googleusercontent.com/5S...=w1238-h825-no With Virtual Dyno: https://lh3.googleusercontent.com/n8...g=w961-h643-no Also: That moment when you have to cut your rear bumper to fit the new lip .. It really hurts you . Image the feeling if cutting for RB fenders .. But the result is well worth it. A huge thanks to www.RideRound.nl / SV Sportscars, probably the cheapest way to get TRD parts in the EU https://lh3.googleusercontent.com/hB...=w1244-h825-no Resulted in this , will post some more pictures soon https://lh3.googleusercontent.com/nh...=w1238-h825-no |
All times are GMT -4. The time now is 01:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.