Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Scion FR-S / Toyota 86 GT86 General Forum (https://www.ft86club.com/forums/forumdisplay.php?f=2)
-   -   Tuners Delight: 2013 Scion FRS (https://www.ft86club.com/forums/showthread.php?t=4242)

FRSDREAMER 03-16-2012 10:17 PM

Tuners Delight: 2013 Scion FRS
 
15 Attachment(s)
Stolen from MotorTrend-:bellyroll:

Scion has always been a friend to the automotive aftermarket, and with the new Scion FR-S, the tuner sect is about to get even more friendly with the brand. Evidence of this close relationship with aftermarket companies can be found in the measuring session Scion hosted at Toyota’s North American headquarters in Torrance, Calif., where numerous tuner brands were invited to take measurements for future parts and get an up-close look at the car. We spoke with many aftermarket companies at the event. Their overall response to Scion’s new front-engine, rear-drive coupe? Overwhelmingly positive.

Scion’s list of invited guests included such tuner industry stalwarts as AEM, DC Sports, Whiteline, and ACT (Advanced Clutch Technology). Also invited were wheel companies like Velox and König, and car audio specialists like Schosche. But those are just a few of the specialty equipment companies in attendance, with many more scheduled to take measurements after we left. Scion provided a number of pre-production cars for inspection, and companies were allowed to get under the car to measure various components, take apart the interior to check clearances for aftermarket audio systems, and poke around in the engine bay to see if there’s any room for improvement.

Airaid, a company known mostly for its truck performance intake systems, went the high-tech route by digitally mapping the engine bay with a 3D scanner. After making a full 3D rendering of the FR-S’ stock intake system, Airaid engineer Clayton Rietz said many parts appear similar to the intake of the Toyota Tacoma—a vehicle for which Airaid already produces an intake system. If that’s the case, a cold-air intake kit for the FR-S might not require much development, meaning go-fast parts could hit the market sooner.
Subaru, which took on the bulk of the development for the FR-S and BRZ, left its mark all over the car, as suspension, exhaust, and brake parts are all stamped with the Subaru logo. Going over the car’s undercarriage with the suspension experts at Whiteline, it appeared many parts might be shared with existing Subaru models. If those components are indeed similar, an aftermarket suspension system could be a test fit away.

Just a peek into the FR-S’ fender wells revealed the car was designed with aftermarket wheels in mind. The inner lips of the front fenders are already smooth, meaning fender rolling won’t be required for that ultra-flush fitment. Both front and rear brake calipers are compact and flush with the wheel hubs, practically eliminating any clearance issues. The rear wheel wells are particularly roomy, since the rear shocks are inboard of the inner fender lining. Several wheel experts mentioned the possibility of fitting 10-inch-wide wheels in the rear with little to no modification.

Based on what we’ve seen at this measuring session, the FR-S certainly fits with Scion’s tuner-friendly image, and has the potential to inject new life into the waning import aftermarket. The Scion FR-S and Subaru BRZ recently began production, meaning we won’t have to wait long to see just what the aftermarket can do with this automotive blank canvas

FRSDREAMER 03-16-2012 10:26 PM

Hey Admin, if you mind, can you delete the pics that we're re-uploaded that are in lower resolution.

7thgear 03-16-2012 10:29 PM

great post! I like the bit about the brake calipers being snug. To think of something so small is pretty awesome.

now if only the insurance/law enforcement industry would not full of ass fucking hardasses.

7thgear 03-16-2012 10:30 PM

hit edit

go into manage attachments

delete the ones you dont need

blur 03-16-2012 10:34 PM

Nice!

RRnold 03-16-2012 10:34 PM

How awesome is that!! Good job Scion! :happy0180:

chate 03-16-2012 10:45 PM

nice
this totally makes me more excited...more tuners means more competition woot for better and cheaper aftermarket parts!!

bestwheelbase 03-16-2012 10:46 PM

Man, I love the FRS interior! Without the head unit, it is so clean.... the dash has basically three knobs (HVAC) and a couple tiny clock-setting buttons. And no buttons on the wheel. Simple is good.

Sport-Tech 03-16-2012 10:49 PM

Thanks for posting this. Is it a limitation of the forum software that the images cannot be added vertically rather than horizontally, which is really awkward to view, especially when there is accompanying text? I gave up and went to the MT article.

I wonder why Scion would bother with all this, why not just provide schematics with the measurements included?

FRSDREAMER 03-16-2012 10:56 PM

Quote:

Originally Posted by Scion FR-S (Post 157682)
Thanks for posting this. Is it a limitation of the forum software that the images cannot be added vertically rather than horizontally, which is really awkward to view, especially when there is accompanying text? I gave up and went to the MT article.

I wonder why Scion would bother with all this, why not just provide schematics with the measurements included?

I don't even know what schematics is, but sorry for the inconvenience.

bestwheelbase 03-16-2012 11:16 PM

Quote:

Originally Posted by FRSDREAMER (Post 157685)
I don't even know what schematics is

He means a diagrammatic illustration of the car's details. The "blueprints" if you will.

They did it this way because hands-on beats illustrations and because it gives them better control over who gets early access to the details. And hype.

ahausheer 03-17-2012 03:00 AM

Motortrend article: FR-S ''measuring'' sesion for aftermartket + some great pics.
 
Most of you have likely read this but for those that have not here is a Motor-Trend article featuring some interesting pics of various components. Highlights from the article:


...... Both front and rear brake calipers are compact and flush with the wheel hubs, practically eliminating any clearance issues. The rear wheel wells are particularly roomy, since the rear shocks are inboard of the inner fender lining. Several wheel experts mentioned the possibility of fitting 10-inch-wide wheels in the rear with little to no modification.

There are some great pics as well @ http://wot.motortrend.com/tuners-del...-s-180887.html

Mr.Jay 03-17-2012 03:12 AM

woah 10s in the rear is crazyy

OrbitalEllipses 03-17-2012 05:03 AM

Quote:

Originally Posted by Mr.Jay (Post 157800)
woah 10s in the rear is crazyy

Dat shit cray.


All times are GMT -4. The time now is 11:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.