Gt86 1jz problems, help please
 

I'm new at this group guys i have a 2013 gt86

I fitted 1jz engine twin turbo the old engine.

But i have problems:

Rpm not working
Cruise control not working
ABS not working

Please advice or help me if you can.

did you shut it down and turn it on again?

Did all the sensors get put back in the right places and hooked up?

Did you set it to wumbo?

Rpm not working on the oem display/cluster?

If so, it won't work unless you're utilizing the frs crank sensor with a custom fabricated trigger for it to read from the jz crank. Even then chances are it'll be off from a true reading...

Cruise control--- lol

abs likely wont work until you have a "happy" crank signal

Willing to be they didn't hook up the factory ECU which has to be done. Bet they just used the 1j ECU to make it run but didn't realise you need to integrate the factory ECU to make all the other systems work.

Lol

From where can i get the fabricated triger ?

They tried to conect the factory ecu with the 1jz ecu, they couldn't.. Thre is a way to do that?

Its totally different sensor you cant connect then with the 1j

I'm pretty sure you have to or you need to run an aftermarket ECU like a Haltech elite. All the cars main systems run through the factory ECU, and if it isn't incorporated in some way nothing will work because it doesn't know it's running.

Is there any way you could contact Ekanoo in Bahrain? I'm sure he has a lot of information that could probably help you solve these small issues. Other than that you've got a lot more work to do.

Sounds like you're in way over your head. :thumbdown:

This is where I was headed with my question^^.
I knew they were different but wanted to see what the OP had to say about it. People need to do their research before they start the project not during or after.
Was sort of mean but:
http://s2.quickmeme.com/img/a7/a7eb1...1cf86f869c.jpg

This! try restarting it