IAT OEM PID/CAN Data - RC MK2
Has anyone had success with trying to figure out IAT OEM PIDs or where it resides within the CAN database?
I'd like to start tracking IATs if possible. I have a couple leads on Paramids but don't know how to translate this into something that RC can accept. IIRC this is all mode 22 stuff. 0xFFF8DB8C 0xFFF87C64 0cFFF890B8 Any help? |
Shouldn't intake temp be an industry standard obd2 PID? Wikipedia's chart says
Code:
PID On the CANbus side, no idea. The Autosports Labs forum has a thread for gt86 CAN mapping, but it's been quiet for year or so. |
Quote:
MAF seems to work. Fuel level was reading wrong values as well. |
Quote:
|
Quote:
Yessir. They now have a preset map for the FRS/BRZ/86 available that has a lot of preconfigured CAN data. The only thing I’m pulling from OBD PID is RPM. https://uploads.tapatalk-cdn.com/201...f3c986066d.jpg I was going to start trying to script and figure out if I can find the IAT over CAN, but figured I’d ask here before I dove into the deep end Sent from my iPhone using Tapatalk |
I know about the presets. I was wondering if it can output or log the raw CAN data that the car is broadcasting to try and find values.
Bit off topic, but I feel like I've seen pictures of your RCTmk2 physically setup (somewhere *cough*), but I can't find them now. Where do you put the gps reciever? I have a bunch of velcro tape and wire clips to lock everything down, just not sure where to put the gps. |
Quote:
From a friend trying to help me Quote:
|
Quote:
Based on my research, you should be able to read RPM from ID=320, offset 2, length 2. |
All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.