Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 34 1 234511 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   JDL 4-2-1 EL header (https://www.ft86club.com/forums/showthread.php?t=130248)

tehShirt 09-14-2018 08:12 AM
JDL 4-2-1 EL header
 
https://scontent-lax3-2.xx.fbcdn.net...51&oe=5C28001F
https://scontent-lax3-2.xx.fbcdn.net...6d&oe=5C30865D
https://scontent-lax3-2.xx.fbcdn.net...3c&oe=5C349D58https://www.ft86club.com/forums/[img...om/WLpbdgA.png
https://i.imgur.com/WLpbdgA.png

Got an email from JDL today. Exciting stuff!

Quote:
I'll be testing a slightly smaller diameter primary version of the header very soon here that I expect to make more torque. This will likely be the production version of the header. The header uses 15 degree merge collectors and will feature all stainless steel flanges. Retail price will be $1099. If there was enough interest I could see about some sort of group buy pricing.
https://www.instagram.com/p/Bl_v97Kj...on_share_sheet
https://www.instagram.com/p/BmtLZSAH...on_share_sheet

@JDLAutoDesign any more info on this?

J1Avs 09-14-2018 08:55 AM
Woah! @JDLAutoDesign are you trying to take on the ACE350???

Interested to hear more!

Breadman 09-14-2018 09:55 AM
whats the price and does it still use stock OP?

gpvecchi 09-14-2018 04:09 PM
If it's cheap, it's mine.

Chuckls 09-14-2018 04:41 PM
It's available for purchase. You just need to contact JDL directly.

J1Avs 09-14-2018 05:28 PM
Quote:
Originally Posted by Chuckls (Post 3133356)
It's available for purchase. You just need to contact JDL directly.
Any idea on price?

PulsarBeeerz 09-15-2018 01:26 AM
Quote:
Originally Posted by gpvecchi (Post 3133333)
If it's cheap, it's mine.
JDL doesn't do cheap...

gpvecchi 09-15-2018 05:12 AM
But cheaper than ACE...

Yoshoobaroo 09-15-2018 08:30 AM
Quote:
Originally Posted by gpvecchi (Post 3133494)
But cheaper than ACE...


That's not hard. Even if it's $500 more than the UEL it'll be cheaper than ACE.

On a side note, I'd like to see numbers where the car is tuned for each header. If this was on a stock tune for both the UEL would have been at a disadvantage and the difference might actually not be as large.

Lantanafrs2 09-15-2018 10:34 AM
It says tuned above dyno graph

Trust86 09-15-2018 11:48 AM
I don’t think it will be priced that much higher over the UEL bc of the slip joint connections.

gtengr 09-15-2018 12:17 PM
Visually the early merge of the second collector location makes me think it would more closely compete with the Ace A150. The JDL probably needs an overpipe and the Ace includes one so that should be factored into the cost.

jflogerzi 09-16-2018 11:48 PM
I am excited for this. I would love to compare this with my tomie uel

Breadman 09-17-2018 07:56 AM
Quote:
Originally Posted by gtengr (Post 3133555)
Visually the early merge of the second collector location makes me think it would more closely compete with the Ace A150. The JDL probably needs an overpipe and the Ace includes one so that should be factored into the cost.

Everyone forgets this when complaining about it burnt expensive. Price still.stung but it helps a little bit


All times are GMT -4. The time now is 08:47 AM.
Page 1 of 34 1 234511 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.