The Diode Dynamics SmartTap™ is a replacement turn signal flasher module compatible with any vehicle using a CF18 (LM449) Flasher. Programming each mode is simple with the help of the included programming guide and the use of existing vehicle controls.

Tap-to-Signal: One-touch signaling is a convenient way to signal to other drivers when switching lanes. Simply tap the turn signal for a series of signal blinks.

Arrival and Departure Modes: When the lock or unlock button is pressed, the surrounding area will illuminate for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired. *May not be compatible with all vehicles*

Unique Hazard Functions: The SmartTap™ has built-in strobe, slo-mo and wig-wag hazard functions to help the vehicle stand out when the hazards are on. Apply these functions on their own, together or with the strobe setting for a total of EIGHT unique hazard functions!


This product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.




Diode Dynamics: SmartTap CF18 (LM449) Flasher Relay for Subaru BRZ / Scion FR-S / Toyota GT86

Questions? Feel free to ask here, PM, email contact@diodedynamics.com or call us: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thank you!
Nick C.
Diode Dynamics

http://diodedynamics.com/images/glob...wag_strobe.gif
Wig-Wag Function!

http://diodedynamics.com/images/glob.../86_strobe.gif

http://diodedynamics.com/images/glob.../86_wigwag.gif

http://diodedynamics.com/images/glob...wag_strobe.gif

Works perfectly on the Toyota 86! Big thanks to Pappas Toyota for letting us borrow a brand new Toyota 86!

Originally Posted by Cockatoo (Post 2885138) @Diode Dynamics Hmmm even the arrival lighting? Kinda bummed my arrival function doesnt work...

Originally Posted by Diode Dynamics (Post 2887130) Contact us if you need help with the programming: contact@diodedynamics.com Nick C.

Originally Posted by Swagopopotamus (Post 2888373) Can you set the wig-wag or double flash to be the full-time hazards, or do you need to leave the stock in the left or right position like I have to with my TapTurn?

Originally Posted by Diode Dynamics (Post 2889295) They can be set to be your flasher default Here's how it's programmed: http://www.youtube.com/watch?v=hsxt3Ga7-do&t=56s Thanks! Nick C.