FT601US in FRS
I've searched everywhere, and still have one unanswered question.
I put a FT601US from a BRZ in my FRS, both 2013. Everything works, except the radio. The only thing I haven't found is WHERE the wire from pin 8 needs to connect to. Does anyone know? |
Trying to power the antenna booster. The FRS antenna connector has one large wire for the antenna, and a smaller wire in the plug.
Running a jumper from pin 8 on the gen pin connector will supply 12v when the HU is in FM/AM/SAT modes, but I haven't found where the other end of the jumper goes. |
There's a post somewhere I used when I did it. I believe I just tapped into the ACC wire so as long as radio is power it is good to go
|
" you would need to add a new pin/wire at pin #8 on your car's 10-pin power/speaker plug, and tie that to the smaller single wire (not the coax antenna cable) on your car's AM/FM plug."
That's what I did |
All times are GMT -4. The time now is 11:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.