Lets see your amp installs
Looking to do the JL box soon and looking for amp location ideas, ideally hidden away somewhere.
|
I'm installing the kicker 11pt8. It's a small self powered subwoofer, but I'll post picture when it's done. Gotta pick up some tools/parts during lunch!
|
Perhaps you could ditch those little 4" speakers in the back seat area and fab up some sort of mount back in there. I think there's a fair amount of space.
|
2 Attachment(s)
Attachment 44846
Not sure if this counts, but I fit a 10W7 in a JL spec ported box..... Amp is a 500/1v2. Attachment 44847 |
My amp is a JL XD600/6, unfortunately I don't have build pics, and since mine was installed underneath the co-driver's seat, I doubt any pics would come out well. lol.
The audio shop said they chose that seat because the battery is on that side (RH) of the car. the amp itself is pretty small, it was a tidy build. I have a 10" flat sub on the back, and 5" speakers in the back, and 6.5" comp in the front |
|
Like to see any ideas, didn't think about behind where the rear speekers are might be plenty of room and don't plan on using them anymore.
Quote:
This is kinda what I had in mid was thinking the XD500/3 just to power separates and sub. |
Quote:
Also, you can use the space right behind the headlight and cover it with some custom carpet that matches color. Look for a good ground location and mount the amp there. This just came to my mind. If you lift the trunk carpet, there is this foam with lug removal tool and some other stuff on the right side. You could ditch the misc tools and mount amp there. That place is also close to ground location. |
Getting mine done tomorrow, I believe the amp is going under the seat... not sure driver or passenger.
|
Here is mine:
[ame="http://www.youtube.com/watch?v=_KP67biB4uo"]2013 FRS Custom Trunk Build by Simplicity In Sound - YouTube[/ame] It really doesn't get any more hidden than this. http://simplicity.elitecaraudio.org/blo79.jpg |
I did a custom fiberglass box for my jl10w3 and jl 900/5 amp on the other side.
https://dl.dropboxusercontent.com/u/...3/DSC_0444.JPG https://dl.dropboxusercontent.com/u/...3/DSC_0445.JPG https://dl.dropboxusercontent.com/u/...2012.13.32.jpg Last one is of trunk with my ridetech air suspension pod. Not trunk space!!!! |
2 Attachment(s)
|
Did my install, have a Kenwood Excelon XR900-5 amp under the drivers seat. It's a 5 ch amp, at 75w RMS for four channels and 600w RMS at the sub. That is running 4 Gauge power and 12 gauge to the sub.
The amp is in a loaner box until I can get the Integrity Concepts box for my car. Sub is a Phoenix Gold Ti2 10" 600w RMS woofer. That makes me happy. Currently learning where ALL the rattles are. http://i.imgur.com/cjQRorg.jpg http://i.imgur.com/5h5hvnx.jpg |
Did my install, have a Kenwood Excelon XR900-5 amp under the drivers seat. It's a 5 ch amp, at 75w RMS for four channels and 600w RMS at the sub. That is running 4 Gauge power and 12 gauge to the sub.
The amp is in a loaner box until I can get the Integrity Concepts box for my car. Sub is a Phoenix Gold Ti2 10" 600w RMS woofer. That makes me happy. Currently learning where ALL the rattles are. http://i.imgur.com/cjQRorg.jpg http://i.imgur.com/5h5hvnx.jpg |
All times are GMT -4. The time now is 10:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.