Raceseng | Revo Engine Pulley Product Release
 

The Raceseng Revo engine pulleys are done and ready to be bolted on! The purpose of our pulleys is to remove as much rotational mass as possible so the engine can rev quicker. We saw the opportunity to create something far from generic, by creating a strong, lightweight pulley that looked as good as it performed. See the breakdown of the different kits below

REVO PULLEY KIT S2
The Revo Pulley Kit S2 is the lightest and only full billet aluminum engine pulley kit on the market! The S2 kit includes the crank, water pump, alternator and (2) idler pulleys. A total of 5.1 lbs. have been cut from the rotating mass of the stock engine pulleys. Available in anodized black and silver.

PULLEY WEIGHTS
» Revo Crank Pulley - 0.810 lbs | Stock Crank Pulley - 4.886 lbs
» Revo Water Pump Pulley - 0.565 lbs | Stock Water Pump Pulley - .990 lbs
» Revo Alternator Pulley - 0.192 lbs | Stock Alternator Pulley - .421 lbs
» Revo Idler Pulley - .539 lbs | Stock Idler Pulley - .683 lbs

AVAILABLE NOW
http://www.raceseng.com/revo-pulley-...r-s-subaru-brz

http://www.raceseng.com/media/catalo...kit-s2-1_2.jpg
http://www.raceseng.com/media/catalo...kit-s2-2_2.jpg


REVO PULLEY KIT S1
The Revo crank, water pump and alternator pulleys shave 4.73 lbs. or 70% of rotating mass from the stock engine pulleys. Available in anodized black and silver.

PULLEY WEIGHTS
» Revo Crank Pulley - 0.810 lbs | Stock Crank Pulley - 4.886 lbs
» Revo Water Pump Pulley - 0.565 lbs | Stock Water Pump Pulley - .990 lbs
» Revo Alternator Pulley - 0.192 lbs | Stock Alternator Pulley - .421 lbs

AVAILABLE NOW
http://www.raceseng.com/revo-pulley-...r-s-subaru-brz

http://www.raceseng.com/media/catalo...kit-s1-1_4.jpg
http://www.raceseng.com/media/catalo...kit-s1-2_3.jpg


REVO CRANK PULLEY
The Revo Crank Pulley is only .81 pounds which is 4.08 pounds lighter then the original pulley! Available in anodized black and silver.

PULLEY WEIGHTS
» Revo Crank Pulley - 0.810 lbs | Stock Crank Pulley - 4.886 lbs

AVAILABLE NOW
http://www.raceseng.com/revo-crank-p...-s-subaru-brz#

http://www.raceseng.com/media/catalo...pulley-1_2.jpg
http://www.raceseng.com/media/catalo...pulley-5_2.jpg

Damn your stuff is sexy

Looking for clarification - do pulley sets take you out of STX?

Simmons on this board is one of our racers and he runs SCCA STX. I would reach out to him to clarify.

He can personally account for the difference the pulleys made on his car.

The most beautifuly done and the most complete (5 pieces with idlers) pulley set - for sure! The lightest... a little overstatement ;) Will likely buy the idler separately though - they look cool and still shred some weight.

Saw these at 86fest and are beautiful!!!! Bought their weighted "Slammer" shift knob and it is money.

Speaking with the guys at Raceseng showed their passion for their products and I will continue to support and buy their products

These are awesome...wonder how much performance increase to the car with the lightweighted pulley???

These are on my list of must haves very soon. Love the look. Love the weight.

Are these underdriven or do they retain the stock drive ratios?

You own the only slammer in the whole world right now! Be proud!

Thanks for the compliments, that means a lot!

They non-under driven and retain stock drive ratios.

Simmons (on this board) is one of our autocross STX racers and he felt a big difference in throttle response and acceleration. Lightened engine pulleys do not necessarily increase horsepower. We are doing some back to back dyno runs with Mike Mann of Moto-East soon!

It never hurts to ask, but can we do a groupbuy on the S2 kits? I have done lightweight pulley mods on my 06 TSX and the car felt more responsive, here's hoping to get the same effect on the BRZ.

I caved and added to cart and checked out don't even need em but couldn't resist damn you!!:)