Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)

- - Michael's 2014 Whiteout Scion FRS Build (https://www.ft86club.com/forums/showthread.php?t=61672)

Michael's 2014 Whiteout Scion FRS Build

After having been a member of these forums for over two years, I finally got around to purchasing my own 2014 Whiteout Scion FRS. It seemed appropriate for me to create my own progress thread as my FRS will be undergoing various modifications. I previously had a 2005 Toyota Celica GT that I heavily modified so many folks over on newcelica.org know me by the username 'AFMichael'. Much like a thread I had for the Toyota Celica, I will be updating this one with new information and pictures of the car's progress over time. To start with, I purchased my FRS on March 20th, 2014 with only 265 miles on the odometer and picked it up on the following Monday after it arrived at the dealership. The first thing to do was to have paint protection film (XPEL) and window tint (Suntek) installed. After all, Florida isn't so kind with the sand and dirt being blasted into the paint on highways nor the high temperatures in the summer. I went over to Auto Paint Guard in Tampa, FL as they are reputable, experienced and have quality service based on others I know. This is the second car in which I had them install window tint and paint film protection and I highly recommend them to anyone else around the Tampa area.

Feel free to subscribe to this thread for any updates!

EXTERIOR:
[DONE] Beatsonic Shark Fin Antenna
[DONE] Diode Dynamics HID Kit, 35w @ 4300K, Low Beams
[DONE] Diode Dynamics License Plate LEDs, Stage 2
[DONE] GrimmSpeed Hood Struts
[DONE] Suntek Carbon Window Tint, 18% / 35% / 55%
[DONE] Toyota OEM Window Visors
[DONE] Varis-style Carbon Fiber Hood
[DONE] XPEL Ultimate Self Healing Paint Protection Film
[DONE] Leg Sport Clubman Ducktail
[DONE] Rocket Bunny V2 Fenders/Side Skirts
[DONE] Varis Front/Rear Bumpers
[DONE] Velox Composite Front Splitter

INTERIOR
[DONE] 3D MAXpider Floor Mats
[DONE] Carbon Fiber Center Console
[DONE] Carbon Fiber Dash Panel, One-Piece
[DONE] Carbon Fiber Gauge Surround Piece
[DONE] Carbon Fiber HVAC Panel
[DONE] Carbon Fiber Shifter Surround Piece
[DONE] Alcantara-Wrapped Shift Surround
[DONE] Diode Dynamics Interior Dome and Trunk LEDs, Stage 2
[DONE] Raceseng Creature Shift Knob
[DONE] SWEIDIT Alcantara A/T Shift Boot
[DONE] SWEIDIT Alcantara Door Panels
[DONE] SWEIDIT Alcantara Handbrake Boot
[DONE] SWEIDIT Alcantara Knee Pads with A/C Trim
[PENDING] DVD and Navigation Receiver
[PENDING] Front and Rear Cameras

ENGINE / EXHAUST:
[DONE] Gruppe-s UEL Header
[DONE] HKS Dual Resonated Front Pipe
[DONE] Invidia Over Pipe
[DONE] K&N Drop-in Air Filter
[DONE] OpenFlash Table w/ Stage 2 Tune (93 Octane)
[DONE] Perrin Inlet Hose - Black
[DONE] Perrin 2.5" Resonated Catback Exhaust

BRAKES / SUSPENSION / TIRES / WHEELS:
[DONE] Airrex Bag Struts w/ Accuair ENDO-CVT e-level Management
[DONE] Continental ExtremeContact DWS06 (F: 215/40; R: 245/35)
[DONE] Eibach 10mm Wheel Spacers
[DONE] Goodridge Stainless Steel Brake Lines
[DONE] Motul RPF 600 Dot 4 Brake Fluid
[DONE] Muteki SR48 Black Lug Nuts (Rear)
[DONE] Perrin Sway Bars (F: 19mm; R: 16mm)
[DONE] Perrin Rear Endlinks w/ Spherical Bearings
[DONE] Project Kics Kyokugen Lug Nuts (Front)
[DONE] SBC Rear Lower Control Arms
[DONE] StopTech Street Performance Brake Pads
[DONE] Whiteline KCA416 Camber Bolts
[DONE] WORK Emotion CR2P 18x9.5 +0 (Front), 18x10.5 -13 (Rear)

ITEMS FOR SALE:
[FOR SALE] Perrin A/T Shift Knob
[FOR SALE] Rallybacker Front Lip (Unpainted)

Another post reserved for pictures.

Congrats on the purchase! :thumbsup: Post some pic's up!

You already have a lot of plans. And weird, I've been looking at the ES6's for a long time too lol.

Haha, I pre-ordered the ES6 the day I was waiting for my flight out of Afghanistan.

Little update. Ordered some more stuff and am waiting for them to arrive (coilovers, shark fin antenna, lug nuts, etc.). My wheels have arrived and I dropped them off at Engine Armor Coatings in Tampa to be powder coated. I also installed the K&N Drop-in filter and Perrin Inlet Hose today since I just passed the 1000 mile break-in mark.

Pictures will come eventually since I no longer have my Nikon D7100 (sold it). I plan on getting a different camera eventually and I'll update this thread with it!

Received my BC Racing BR Extreme Low, 10k spring rates, coilovers yesterday and installed them today. Maybe a 1.5" drop atm but I will be letting it settle and then dropping it more before I get an alignment done. Hopefully my wheels will be done being powder coated very soon as well.

Picked up my wheels from the shop on Tuesday. I had the spokes powder coated platinum black with a semi-gloss.

https://fbcdn-sphotos-c-a.akamaihd.n...14898027_n.jpg

Updates? Been wanting to see these on for a while
Now...

I've just slowly been editing the timeline at the bottom of the first post with what I've done. I still don't have an adequate camera for good pictures right now. I'm waiting on delivery of my Eastwood fender roller and Continental tires atm.

Here's a small update...this is right after rolling my fenders. Car is still propped up on jack stands so clearance isn't true. Waiting on my hubcentric rings and Muteki lug nuts then I'll go lower with the wheels on.

http://photos-b.ak.instagram.com/hph...85797328_n.jpg

I lowered the car a little this morning and had an alignment done. I want to go lower but waiting until I get camber bolts for the front and rear LCAs so that I can adjust the camber a bit more for better clearance. I'll post a picture when I get home from work tonight.

For the time being, I am doing a bit of research on what camber bolts and rear LCA that I should get. OEM camber bolt (SU003-02818) should suffice from what I am reading or should I pay the extra for Whiteline's KCA416? Lastly, is anyone having any issues with the revised version of SPC's rear LCA?