Please post your Aftermarket Seats
doing a bit of research.. I am trying to figure out what seat brackets to buy for my Corbeau FX1 Seat .. I had some custom ones made that used the stock sliders but the seat was offset to the left about 3inches.. and they sat funny..
Please post you setup and what you did for the seat brackets.. Side mount or Bottom Mount .. Thanks in advance Mine for reference: https://scontent-a-ord.xx.fbcdn.net/...12545332_n.jpg https://scontent-a-ord.xx.fbcdn.net/...56620614_n.jpg Thanks Bill |
Recaro profi spg and rails are nagisa. The seat centered and no play worth rails.
http://i509.photobucket.com/albums/s...ps12cbc53d.jpg |
^^^ How narrow is the seat.. ??? and does it slide the whole range??
TIA Bill |
Quote:
http://www.evasivemotorsports.com/mm...ze_425x312.jpg |
^^^ yeah 15.5 inches is pretty dang narrow.. For reference the FX1wide is 22 inches.. and a FX1 is 19inchs.. and a FX1 pro is 17inches..
http://www.corbeau.com/product_image.../fx1-pro-l.gif http://treperformance.com/images/F28650532.gif http://www.corbeau.com/product_image...loth/fx1-l.gif |
1 Attachment(s)
|
1 Attachment(s)
rs-g super stark, weights 4.5 kg, sorry for the phone picture.
|
^^^ what brackets are you using.. please..
|
Quote:
http://apps.recaro-automotive.jp/bfm...9&cye=infinity and these adapters http://www.club.recaro-automotive.jp...eparts/adaptor |
good thread, i wanna see mooore
|
Can somebody put up a photo of where they mounted their anti submarine belt.
Sent from my iPhone using Tapatalk |
Not quite aftermarket, but this was done for headroom. The sculpted part of seat base sits on the floor. Airbags are swapped over. oem rails on the seat were stripped of all rx8 mounting points then bolted through to the iron strips. Was able to line up factory floor hole with the seat rail hole in the back right (seatbelt) corner.
http://farm8.staticflickr.com/7443/9...7263abc8_c.jpg http://farm8.staticflickr.com/7355/9...1fd7ba24_c.jpg |
Here are mine, out of a Evo X. Using planted seat bases and custom fabricated to fit.
http://www.jadecrew.com/wp-content/g...oject86-03.jpg http://www.jadecrew.com/custom-recar...seats-in-fr-s/ |
Quote:
I may have to steal this idea from you Sent from my iPhone using Tapatalk |
All times are GMT -4. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.